Quick guide instructions to installing MS2/Extra 3.0.x

1. If you are presently using a different code version on your MS2 you should save you settings.
e.g. File->Save Tune As in TunerStudio

2. Ensure TunerStudio is closed and nothing is using your serial port.

3. Run download-ms2-firmware.bat (e.g. double click on it) and follow the instructions.
NOTE!! The standard graphical downloader WILL NOT WORK with MS2/Extra.

Let me repeat that - YOU **MUST** USE download-ms2-firmware.bat, do not use the standard downloader.

If you have problems with strange errors when loading the code try again with a different computer
as this has frequently been found to be the problem.

4. Using TunerStudio is required. Megatune cannot cope with the tuning settings file.

5. Open TunerStudio
   Go to Project Properties, tick Custom and click ... then browse to this
   directory for megasquirt-ii.ms2extra  This applies to Megasquirt2 and Microsquirt.
   Go to Project Properties / Settings and ensure the settings for Microsquirt or not are correct.

6. Note!! When first creating a tune, you MUST be connected to the Megasquirt 'online' or open
an existing MSQ file. If you start tuning offline with blank settings you will create huge
problems for yourself.

Come to  www.msextra.com  for support.

Please consider making a donation to the developers.
http://www.msextra.com/doc/donations.html
