Printable Version of Topic
914World.com _ FS/WTB: 914 Parts _ MSDS Columbus Day Sale
Posted by: Maltese Falcon Oct 10 2009, 08:13 PM
We are throwing a Chris Columbus Day sale, going thru the end of October.
914World members can select any of our part number selections over at http://www.msdsinc.com and take 40% off of the web prices. You can add nickle chrome plating to the headers for only $14.92 , and shipping to the 48 states is only $14.92 !
The Vega, Pinto and Monte Carlo will set sail on Oct. 31, 2009, so don't miss the boat ! Visa, MC, Amex, Discov, and pre-pd chks all accepted. Get ahead of your competition with MSDS upgrades
We're at 818-507-6937 or tech@msdsinc.com
Attached thumbnail(s)
Posted by: Gint Oct 10 2009, 09:04 PM
Cool.
I made your URL a link.
Posted by: wertygrog Oct 10 2009, 10:01 PM
Do you guys make a header for the type 4? If so, I would be VERY interested, especially if it had 1 5/8" or 1 3/4" tubing!
Posted by: kconway Oct 10 2009, 10:52 PM
Martin,
Does this include your rear GT valance as well?
Kev
Posted by: Maltese Falcon Oct 11 2009, 01:33 AM
QUOTE(kconway @ Oct 10 2009, 09:52 PM)
Martin,
Does this include your rear GT valance as well?
Kev
Thanks Gint
Brent , pm sent !
Kev, sure thing ...I know that I'm low on the stock of the GT valance...call me this week and I'll find one in inventory. Go ahead and take the discount (40%). The box is over$ize for shipping, so perhaps you can do a local p/u (from the LBC) ?
I'm at 818-507-6937
Marty
Posted by: dlestep Oct 11 2009, 09:08 AM
...I am also interested in headers for the 4. It would have been nice if you answered Brent's question in the thread vs a PM. Then I would not have to ask the question....
Do you 1.50 headers for the following:
1.7 heads / 2.0 heads
Dave
Posted by: jgara962 Oct 11 2009, 07:11 PM
QUOTE(dlestep @ Oct 11 2009, 08:08 AM)
...I am also interested in headers for the 4. It would have been nice if you answered Brent's question in the thread vs a PM. Then I would not have to ask the question....
Do you 1.50 headers for the following:
1.7 heads / 2.0 heads
Dave
Me too
Posted by: Maltese Falcon Oct 11 2009, 07:38 PM
Dave and John, our T 4 headers are designed on the 2.0 head. The primaries attach directly to the exhaust ports w/o any adapters.
Thx for your interest !
Marty
Posted by: Krieger914 Oct 11 2009, 09:26 PM
Yeah! I need a set for my 6 conversion. I have been on the fence. I'll call tomorrow.
Posted by: jgara962 Oct 11 2009, 09:53 PM
QUOTE(Maltese Falcon @ Oct 11 2009, 06:38 PM)
Dave and John, our T 4 headers are designed on the 2.0 head. The primaries attach directly to the exhaust ports w/o any adapters.
Thx for your interest !
Marty
Thanks for the info, but I'm not seeing them on your site. Are they so new that you don't have them there yet or am I just blind
Posted by: Maltese Falcon Oct 12 2009, 10:23 PM
QUOTE(Krieger914 @ Oct 11 2009, 08:26 PM)
Yeah! I need a set for my 6 conversion. I have been on the fence. I'll call tomorrow.
Thx Andy, check your voicemail I called today.
John>> plz check your PM!
Marty
Posted by: montoya 73 2.0 Oct 12 2009, 10:31 PM
QUOTE(jgara962 @ Oct 11 2009, 08:53 PM)
QUOTE(Maltese Falcon @ Oct 11 2009, 06:38 PM)
Dave and John, our T 4 headers are designed on the 2.0 head. The primaries attach directly to the exhaust ports w/o any adapters.
Thx for your interest !
Marty
Thanks for the info, but I'm not seeing them on your site. Are they so new that you don't have them there yet or am I just blind
I only see info for the 6 cylinder P/N HO916. Also the air intake says 2.0 engine 74 - 76. Will it fit a 73?
Posted by: jgara962 Oct 12 2009, 10:53 PM
QUOTE(montoya 73 2.0 @ Oct 12 2009, 09:31 PM)
QUOTE(jgara962 @ Oct 11 2009, 08:53 PM)
QUOTE(Maltese Falcon @ Oct 11 2009, 06:38 PM)
Dave and John, our T 4 headers are designed on the 2.0 head. The primaries attach directly to the exhaust ports w/o any adapters.
Thx for your interest !
Marty
Thanks for the info, but I'm not seeing them on your site. Are they so new that you don't have them there yet or am I just blind
I only see info for the 6 cylinder P/N HO916. Also the air intake says 2.0 engine 74 - 76. Will it fit a 73?
Just to remove the mystery for anyone else that reads this thread, send Marty a PM about the headers - he has a reason for the lack of info on the site.
Posted by: Maltese Falcon Oct 13 2009, 09:50 PM
Drew, the msds 914 2.0 cone air filter system does fit the '73 2.0, I'll have to bash the webmaster for not dating this product line correctly ! We will throw in the rain SS shield , cause you have such a sharp eye for details.
In stock and 30% off during this sale.
Thx !
Marty
Posted by: Maltese Falcon Oct 14 2009, 09:31 PM
Drew, you have PM !
Marty
Posted by: Maltese Falcon Oct 16 2009, 11:34 PM
Thx Jgara , your items are heading your way this Monday !
...and thx to all that are jumping on this 40% off sale...
Marty
Posted by: jgara962 Oct 17 2009, 09:04 AM
QUOTE(Maltese Falcon @ Oct 16 2009, 10:34 PM)
Thx Jgara , your items are heading your way this Monday !
...and thx to all that are jumping on this 40% off sale...
Marty
Thanks Marty, I can't wait!
Posted by: Maltese Falcon Oct 23 2009, 09:22 PM
Jgara...you've got FedEx !
marty
Posted by: jgara962 Oct 24 2009, 11:44 AM
My headers arrived on Thursday. I'm all set to paint them with VHT this afternoon. Now I just need to decide what type of muffler to use
Posted by: 6freak Oct 24 2009, 10:50 PM
QUOTE(jgara962 @ Oct 24 2009, 10:44 AM)
My headers arrived on Thursday. I'm all set to paint them with VHT this afternoon. Now I just need to decide what type of muffler to use
TRAID ..YOU WILL LIKE IT
Posted by: Maltese Falcon Oct 25 2009, 06:11 AM
[/quote]
I only see info for the 6 cylinder P/N HO916. Also the air intake says 2.0 engine 74 - 76. Will it fit a 73?
[/quote]
Drew, I have a '73 filter kit in red for you...red makes more HP
Marty
Posted by: inschool Dec 2 2009, 03:07 PM
Marty,
Thank you so much for everything. The headers look great, fit perfect, and should sound awesome.
I will Highly recommend you and your products on here.
Thank you again
Andrew, in Florida.
Posted by: Krieger914 Dec 4 2009, 10:11 AM
I got mine too. Beatutiful, great price, awsome service!
Posted by: proto31 Dec 4 2009, 12:28 PM
Same thing here, super quick delivery and quality that exceeded my expectations! REALLY nice parts, thanks Marty!
Dan
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)