Printable Version of Topic

Posted by: McMark Oct 15 2009, 12:39 PM

New front rotors $60 each. Bearings/Seals $16 per side. So a whole new setup is $152 + shipping.

These rotors have been measured with appropriate rotor measurement tools and both are good for resurfacing. The old bearings are still in place, but haven't been inspected, but were used on a running car that had no bearing noise. Would recommend cleaning and repacking the bearings if you do reuse them.

Asking $50 for everything + shipping (2 flat rate boxes at $10 each).

I can post pictures if you don't know what rotors look like.

Posted by: Tom_T Oct 16 2009, 01:51 PM

Aren't those the blades on helicopters? .....geesh, I didn't even know they made 914-helo models!?

...although I have flown at very low altitudes in my "standard non-rotary-wing" 914-2.0 in the past!

Posted by: McMark Mar 2 2010, 01:25 PM

Okay, pics.

Somebody's gotta want to save 66% on basically new front brake parts. If I hadn't gone to five lug, these front rotors would have been surfaced and installed. They're GREAT!

I can also offer them surfaced, at cost.


Attached image(s)