Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: 6 Cyl '77-'83 911 sc 3.0 Air Box Only
Posted by: Jeffs9146 Mar 4 2010, 07:03 PM
**************I found one!!*************************
No need anymore, thanks to all!
As stated in the title, I am looking for an air box for an injected 3.0 sc motor to try to rotate the injection on my 3.0 and fit it into my 914 without cutting the car!
If this works it could be a prototype for others who want to install an injected 3.0 into a 914 and dont like the idea of chopping it up!
The item I need is #9 in this photo:
Attached thumbnail(s)
Posted by: ahdoman Mar 4 2010, 11:30 PM
You might check with Cap'n Krusty. He's got a shop with lots of old parts laying around. He may even have one that's been blow apart under backfire if you're going to cut it up. Possibly Slits (Ron) also.
Posted by: rfuerst911sc Mar 5 2010, 02:21 PM
I have one that is clean and does not have a pop-off valve. Came with some parts I picked up. Asking $50.00 plus shipping. I'm pretty sure it is for a small port but not 100% sure. I could measure the OD of the nipples on the air box if you're interested.
Posted by: Jeffs9146 Mar 6 2010, 01:52 AM
I bought one today at Parts Heaven for $40 and I am planning on cutting it up for parts so even that was pricey.
The port size doesnt matter, because I am not using that part of it, so even an earlier one will work but again I am looking for cheap stuff to cut up and see if this can be done!
PS: I can use any pieces that people have, the more pieces I have the less good boxes I will have to distroy to try and make this work!
So: I still need another one!!
Posted by: Jeffs9146 Mar 10 2010, 04:05 PM
Bump!! 
Does that include shipping?
Posted by: bfrymire Mar 11 2010, 03:01 AM
Jeff,
I am local and have one. What do you need to do? If you don't destroy it, I may be able to loan one to you.
-- brett
Posted by: Jeffs9146 Mar 11 2010, 01:01 PM
Thanks for the offer but I am going to distroy it!!
Posted by: rfuerst911sc Mar 11 2010, 05:08 PM
Bump!!
Does that include shipping?
I was asking $50.00 plus shipping. My guess is USPS can deliver this for around $10.00-12.00. Having said that $55.00 and it's yours. I don't do paypal so payment would be by check. Let me know if interested. Thanks
Posted by: Jeffs9146 Mar 17 2010, 02:12 PM
After doing some more research I have found out that I need the one that has the metal inside the distrabution ports. The air filter box can be damaged! If yours does I will take it!
Posted by: rfuerst911sc Mar 17 2010, 02:51 PM
After doing some more research I have found out that I need the one that has the metal inside the distrabution ports. The air filter box can be damaged! If yours does I will take it!
I see no metal in the distribution ports. Just looks like the material that the box is made from.
Posted by: Jeffs9146 Mar 17 2010, 10:15 PM
Thanks I don't think it is going to work!
I will try to post a photo of what I am looking for this week!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)