Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: NLA -Oil Temp Plate, Taco plate & orig clips
Posted by: jim_hoyland Mar 4 2010, 09:29 PM
A nice set of original parts consisting of the Oil sender plate-threading is perfect; The taco plate--or cover--unbent and the arm that holds the wire is near perfect; and about 18" of the original covered wire with two special metal clips for mounting to the underbody.
It's pretty rare to find a unabused taco plate, let alone the metal clips
Attached image(s)
Posted by: edrotol Mar 5 2010, 09:24 AM
QUOTE(jim_hoyland @ Mar 4 2010, 08:29 PM) 
A nice set of original parts consisting of the Oil sender plate-threading is perfect; The taco plate--or cover--unbent and the arm that holds the wire is near perfect; and about 18" of the original covered wire with two special metal clips for mounting to the underbody.
It's pretty rare to find a unabused taco plate, let alone the metal clips
PM sent to buyt. Thanks.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)