Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Getting outthe sawzall today
Posted by: Lennies914 Mar 7 2010, 10:33 AM
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie
Posted by: underthetire Mar 7 2010, 11:15 AM
I still want the front trunk. Let me know how much...And i'm pulling those 2 liter heat exch. for you today. Can probably drop off tonight. Cheers.
Posted by: Lennies914 Mar 7 2010, 11:40 AM
I still want the front trunk. Let me know how much...And i'm pulling those 2 liter heat exch. for you today. Can probably drop off tonight. Cheers.
Trade?
Posted by: underthetire Mar 7 2010, 11:43 AM
Trade hell, I already gave them to you! They look better than yours I think, but not great.
Posted by: Lennies914 Mar 7 2010, 11:50 AM
Okay, you're right. We'll consider it rent for the welder!
Posted by: underthetire Mar 7 2010, 12:01 PM
How about what kind of beer do you drink?
Posted by: schuh1129 Mar 7 2010, 12:15 PM
I am in need of the track that holds the front trunk seal
the Channel/Track for the front hood seal closest to the windshield that runs across from side to side. The approx overall dimensions are 54 inches but I don't need it all. If center is 27" I would need 9" to the right of center and 15" to the left of center as you stand at the front bumper and look at the windshield. Thanks Mike
Posted by: Lennies914 Mar 7 2010, 02:42 PM
How about what kind of beer do you drink?
coors light
Posted by: underthetire Mar 7 2010, 02:48 PM
How about what kind of beer do you drink?
coors light
You got it.
Posted by: two-strokejohn Mar 7 2010, 05:25 PM
I'm in need of a non rusted through engine mount for a 4 cyl on the right side that is welded to the frame. also any salvageable right and left side hellhole repair spare parts ( rear long, inner and outer etc.......... east coast car.
thanks, John
Posted by: karlo Mar 7 2010, 05:41 PM
I'm looking for the rear quarter panels. The actual wheel arches need not be in perfect condition, since I'm installing GT flares, but the PO cut out most of the quarter panels to fit some fiberglass flares, and I need to put some of that back on the car. You can get a better idea what I need from http://people.opera.com/karlo/914/renovation/quarter.jpg
Posted by: Lennies914 Mar 8 2010, 12:42 AM
I am in need of the track that holds the front trunk seal
the Channel/Track for the front hood seal closest to the windshield that runs across from side to side. The approx overall dimensions are 54 inches but I don't need it all. If center is 27" I would need 9" to the right of center and 15" to the left of center as you stand at the front bumper and look at the windshield. Thanks Mike
Mike, Can you send me a pic of where you would like it cut? I understand the piece you want, just clarifiy where you are going to seam it in. Thanks, Lennie
Posted by: Lennies914 Mar 8 2010, 12:46 AM
I'm in need of a non rusted through engine mount for a 4 cyl on the right side that is welded to the frame. also any salvageable right and left side hellhole repair spare parts ( rear long, inner and outer etc.......... east coast car.
thanks, John
John this is a pretty rusty car. the hell holes are gone. Mount may be salvagable. Can you send me anything that shows exactly what you need?
Posted by: Lennies914 Mar 8 2010, 01:04 AM
I'm looking for the rear quarter panels. The actual wheel arches need not be in perfect condition, since I'm installing GT flares, but the PO cut out most of the quarter panels to fit some fiberglass flares, and I need to put some of that back on the car. You can get a better idea what I need from http://people.opera.com/karlo/914/renovation/quarter.jpg
I will have to send you photos of what I have. Someone wanted a section that the right rear trailing arm bolts to so I started cutting it out and cut the fender to gain access, then he didn't want it
. I may have cut too much, I don't know. I will look at the drivers side and see what condition it is in and send you some photos.Thanks, Lennie
Posted by: schuh1129 Mar 8 2010, 05:04 PM
I just wanted to send a picture of the front trunk area of track that I needed. The area between the blue tape is what I need if it is a bit bigger that would be fine too. Thanks Mike
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie Posted by: schuh1129 Mar 8 2010, 05:09 PM
Thought I attached the pictures but guess I didn't....I'll try again. It doesn't seem to be working I can send it to your e-mail if you would like, Mike
I just wanted to send a picture of the front trunk area of track that I needed. The area between the blue tape is what I need if it is a bit bigger that would be fine too. Thanks Mike
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie Posted by: Lennies914 Mar 8 2010, 09:45 PM
Thought I attached the pictures but guess I didn't....I'll try again. It doesn't seem to be working I can send it to your e-mail if you would like, Mike
I just wanted to send a picture of the front trunk area of track that I needed. The area between the blue tape is what I need if it is a bit bigger that would be fine too. Thanks Mike
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie Email photos to lennie.willis@gmail.com
Posted by: two-strokejohn Mar 9 2010, 08:31 AM
the motor mount I need is on the left circled area.
Attached image(s)
Posted by: Lennies914 Mar 20 2010, 07:24 PM
I am in need of the track that holds the front trunk seal
the Channel/Track for the front hood seal closest to the windshield that runs across from side to side. The approx overall dimensions are 54 inches but I don't need it all. If center is 27" I would need 9" to the right of center and 15" to the left of center as you stand at the front bumper and look at the windshield. Thanks Mike
Mike, do you still need this peice?
Posted by: basaltblack Mar 21 2010, 10:47 PM
How is the front passenger wheel well near the bottom. I need a rust repair patch
Thanks
Chris
Posted by: Lennies914 Mar 22 2010, 07:22 AM
send me a pic or better description, the front fenders have been cut off and sold.
Thanks
Posted by: basaltblack Mar 22 2010, 06:09 PM
Here is a pic but hard to tell because the car is on its side on a rotisserie
Attached image(s)
Posted by: Lennies914 Mar 22 2010, 11:44 PM
I can't make out what I'm looking at
Posted by: basaltblack Mar 23 2010, 09:21 AM
Here is a better picture of another car. just the bottom 7" where the edge starts to curve right where the tire would kick up water
Attached image(s)
Posted by: Lennies914 Mar 24 2010, 06:32 PM
I've got that piece. PM me your phone #, I'll call you this weekend prior to cutting it out
Posted by: xsurfer Mar 26 2010, 09:51 AM
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie If the fellow in Norway passes on the rear quarter panels I need from the left door to fender well 15" up.
Also interested in the weather stripping channel for the front hood, rust free or reasonable sections of rust free.
Thanks
Gene
Posted by: Lennies914 Mar 26 2010, 05:13 PM
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie If the fellow in Norway passes on the rear quarter panels I need from the left door to fender well 15" up.
Also interested in the weather stripping channel for the front hood, rust free or reasonable sections of rust free.
Thanks
Gene
I'll take a look at them.
Posted by: xsurfer Mar 26 2010, 06:45 PM
I have a '73 that I'm parting out. Floor, longs, and trunk rusted. Let me know if anyting is needed. Thanks, Lennie If the fellow in Norway passes on the rear quarter panels I need from the left door to fender well 15" up.
Also interested in the weather stripping channel for the front hood, rust free or reasonable sections of rust free.
Thanks
Gene
Posted by: cary Apr 23 2010, 09:48 AM
Are you still cutting? I too am looking for the track for the front trunk seal. Did you already cut it out and sell it?
Posted by: Lennies914 Apr 23 2010, 05:34 PM
Are you still cutting? I too am looking for the track for the front trunk seal. Did you already cut it out and sell it?
Sorry, it's gone.
Posted by: underthetire Apr 23 2010, 07:32 PM
Are you still cutting? I too am looking for the track for the front trunk seal. Did you already cut it out and sell it?
Sorry, it's gone.
Maybe not.
I have his front clip, but I don't need that. The whole piece or just portions?
Posted by: cary Apr 23 2010, 10:11 PM
I'm working on a PM. But if that doesn't work out. I'm interested.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)