Printable Version of Topic

Posted by: bdstone914 Apr 1 2010, 09:32 PM

I bought a 74 that I am going begin selling parts off of. It has a dark brown interior with very good door panels and OK seats and back pad. No console. Engine is out of the car and apart as it was running on two cylinders so the PO took off the FI and heads. Probably had an FI problem. The body has no damage but does have a hole in the long below the battery box and in the bottom of the long. It could be saved. No immediate to cut into it. Also has good 8 spoke wheels. Good painted bumpers.
Prices:
Seats $100 for the pair.
Near perfect drivers side rear tail light lens $75
Brown pack pad $100
Rear spoiler $50
door panels $100
Bumpers $75 each.
All the FI $75
Short block - free to good home, good home found
Wheels $200
1.8L heads pending sale. Sold
OEM 1.8L muffler $25


Make requests and offers.
Can deliver larger parts in the Socal or San Diego area for gas or bring to the R & G swap meet on April 25.

Bruce
http://img641.imageshack.us/my.php?image=dscf9612.jpg
http://img202.imageshack.us/my.php?image=dscf9613.jpg
http://img255.imageshack.us/my.php?image=dscf9614.jpg
http://img687.imageshack.us/my.php?image=dscf9615.jpg
http://img202.imageshack.us/my.php?image=dscf9620.jpg
http://img255.imageshack.us/my.php?image=dscf9609.jpg
http://img202.imageshack.us/my.php?image=dscf9610.jpg
http://img202.imageshack.us/my.php?image=dscf9611.jpg



Bruce

Posted by: enikolayev Apr 1 2010, 09:44 PM

What do you mean by "all the FI?"

And just so no one else would snag it, I want it.

Posted by: enikolayev Apr 1 2010, 09:45 PM

Do you mean everything including wiring, injectors, etc?

Posted by: Tom_T Apr 1 2010, 09:50 PM

Bruce ....


Which carpet does it have - OE loop pile or other (perlon/aftermarket) - brown or dark tan (#503, which is what I need) & in what cond. at the driver's floor & tunnel pieces?

Chrome bumpers restorable?

Posted by: 396 Apr 1 2010, 11:27 PM

I'm in for the front bumper - any pictures?

OH I'll take the short block off your hands.. could pick up this weekend.

Posted by: bdstone914 Apr 2 2010, 03:59 AM

Eugene.
The FI was removed and put in the trunk. I have not inventoried it but most of the components seem to be there. Since it was running on only two cylinders there is probably some bad FI part. It does not include the pump. I am going to go there today and hoe to get most of the loose parts rounded up.
Bruce

Posted by: bdstone914 Apr 2 2010, 04:01 AM

The bumpers are painted. I may get the short block tomorrow and could probably drop it off on my way back from Winnetka where the car is located. PM me your phone number and address.
Bruce

Posted by: bdstone914 Apr 2 2010, 04:04 AM

Tom,

As per the ad it has painted bumpers. Carpets are shot or missing in most places
I reply is worthless when the reader does not read all of the words.
I do have rechromed rear bumpers for sale for about $375.

Bruce

Posted by: computers4kids Apr 2 2010, 09:27 AM

Bruce,
If you come across a parts car that you can remove the bracket from (like the last one you whacked off for me) please do so.
Thanks, Mark

Posted by: Tom_T Apr 2 2010, 10:58 AM

I blame it on the Evelyn Woodhead Sped Redding Course!

... like you, I'm old, impatient & bad eyes to boot!

We've talked by phone about the rechrome/resto group you know to do a CW level rechrome up in Reseda IIRC, but I'm trying to round up a restorable 73-74 F chrome "core" with the tit holes & brackets, for that purpose since I have a core 71 one. I'll bring that to G&R to see if I can find a swap for a 74-74 F core from anyone there.

I just missed your NOS one to Joe (detoxcowboy) last month!

Posted by: wqqdys Apr 2 2010, 01:11 PM

Bruce- is the front valance available? If so, is it stock, how's the condition, and how much with shipping to 89117 (Las vegas, NV)? Thanks, Larry

Posted by: RiqueMar Apr 2 2010, 02:23 PM

Bruce, I'm looking for 2 door stop pins and the rings that hold them to the door sill. They connect the door stops to the body.

Posted by: enikolayev Apr 2 2010, 04:02 PM

Ok that would be great. I'll take it if the TB is not seized.

Posted by: 396 Apr 2 2010, 10:12 PM

pm you

Posted by: bdstone914 Apr 2 2010, 11:39 PM

Front valance is a fiber glass LE type. I will probably keep it as it is better than any other one I have.
Bruce

Posted by: McMark Apr 2 2010, 11:52 PM

Got those ebrake cable attaching parts on this car?

If the shortblock isn't gone by WCR, maybe we can get someone to cart it up and I'll grab it.

Posted by: 396 Apr 3 2010, 08:05 AM

I've already said I take the 'short' block... need to read the tread

Posted by: McMark Apr 3 2010, 01:37 PM

Read?

Bruce, you cuttin' this car up? I need metal.

Posted by: FourBlades Apr 3 2010, 06:34 PM

Bruce,

I need a fuel tank sender, light switch, and wiper switches that are working.

If you still have those can you add them to my existing order for wiring stuff
and rebuilt pedal cluster?

Let me know if you have those parts and I will paypal the additional funds.

Thanks,

John

Posted by: TC 914-8 Apr 3 2010, 07:46 PM

What about the transaxle is it available?

Posted by: typeIVfan Apr 3 2010, 11:14 PM

How is the windshield?
In Long Beach.

Posted by: bdstone914 Apr 4 2010, 03:18 AM

Not cutting this one right away if at all but I have other cars that can be cut ?M me what you need.
Bruce

Posted by: bdstone914 Apr 4 2010, 09:33 AM

No cracks. I have not inspected it closely for pitting.
I think it was a replacement no original windshield. When i pull it I will be asking $100 for it.

Bruce

Posted by: enikolayev Apr 12 2010, 09:07 PM

Decided on a different route for my engine, no longer need the FI system

Posted by: InkyP Apr 13 2010, 11:00 AM

List of Wants:

Driver side door handle inside and out
Retractable seatbelt
Targa top rear padding that the locks go threw on the inside.

Thanks

Posted by: Gint Apr 13 2010, 05:12 PM

Posted by: RoadGlue Apr 13 2010, 05:30 PM

Do you happen to have the 1.8 heads and if so are they for sale?

Posted by: bdstone914 Apr 13 2010, 10:20 PM

PM's sent, ad updated and pictures added. Car is getting delivered Saturday the 17th of April.
Bump

Posted by: RobW Apr 13 2010, 11:46 PM

I need a good accelerator and an interior light..

Posted by: sgrisanti Apr 14 2010, 06:45 AM

Do you have the small black round knob pull that opens the engine cover. It is in the drivers side

Posted by: sgrisanti Apr 14 2010, 06:47 AM

Do you ave the two rear targa latches that are in the roll bar?
Make requests and offers.
Can deliver larger parts in the Socal or San Diego area for gas or bring to the R & G swap meet on April 25.

Posted by: bdstone914 Apr 14 2010, 07:52 AM

PM sent,
Maybe on the interior light. The Mexico one are available cheap. If it is a good silver trim one I will want $39 for it.

Posted by: bdstone914 Apr 14 2010, 07:54 AM

I have refinished powder coated targa latches for $50 per pair. Mo-better than used.

Bruce

Posted by: gerziebaker Apr 28 2010, 08:59 PM

How much for the fuel pump?

Posted by: tod914 Apr 29 2010, 05:55 AM

Bruce, looking for a near perfect passanger side rear tail light housing. I don't need the lense. Thanks, Tod

Posted by: wqqdys Apr 29 2010, 08:29 AM

Bruce- is the carpet OE? I'm looking for the piece that fits in the driver's foot well. Also, how's the condition of both the front turn signal lenses and how much. Thanks, Larry

Posted by: pilothyer Apr 30 2010, 10:08 AM

Hello Bruce.....I am interested in the Brown seats.....I am wondering just how OK are they? any tears ? Please let me know as well as how much shipped to 35603..........Thanks.........Jerry

Posted by: OpusX67 May 1 2010, 09:00 PM

Bruce, what size and condition are the wheels?

Posted by: bdstone914 May 1 2010, 10:30 PM

PM's sent to all replies

Posted by: fleblanc May 2 2010, 12:02 AM

Hello,
Is The FI still available,
Can you confirm MPS and deceleration Valve part number ,
Best regards,
Fred

Posted by: bdstone914 May 2 2010, 05:48 AM

I have a committed buyer for the FI. This is a 1.8L so there is no MPS. I have other FI parts. What part number MPS and decel valve do you need?

Posted by: mepstein May 2 2010, 06:02 AM

Looking for rear trunk lock in great shape and foglight grills that can be painted black. Thanks, Mark

Posted by: jetboy May 2 2010, 04:14 PM

How straight and how much rust on both bumpers?

Posted by: rymann May 2 2010, 10:07 PM

Hey Bruce, windshield?....still available?....lmk

thanks

rob

Posted by: moparrob May 3 2010, 11:03 PM

Bruce - PM sent on the rear bumper.

Thanks

Posted by: rymann May 4 2010, 10:35 PM

Hey Rob U sent me the p.m. instead of Bruce... ...hey Bruce get with Rob for the pm........

Posted by: wponting May 5 2010, 11:15 AM

hey, i will purschase that muffler. i live north of riverside in redding. whats the condition of it?

Posted by: Rav914 May 5 2010, 04:09 PM

Hey Bruce,

I saw someone asked for the fuel sending unit; but do you have another operable one in your stash?

Looking for a heat control lever. The one on the tunnel. Thanks,

Nate

Posted by: oldsoldier May 6 2010, 06:47 PM

I need the complete windshield chrome trim.

Posted by: gsbeane May 31 2010, 08:46 PM

I need a good pair of steel rocker panels. Do you have them and how much?

quote name='bdstone914' date='Apr 1 2010, 10:32 PM' post='1295999']
I bought a 74 that I am going begin selling parts off of. It has a dark brown interior with very good door panels and OK seats and back pad. No console. Engine is out of the car and apart as it was running on two cylinders so the PO took off the FI and heads. Probably had an FI problem. The body has no damage but does have a hole in the long below the battery box and in the bottom of the long. It could be saved. No immediate to cut into it. Also has good 8 spoke wheels. Good painted bumpers.
Prices:
Seats $100 for the pair.
Near perfect drivers side rear tail light lens $75
Brown pack pad $100
Rear spoiler $50
door panels $100
Bumpers $75 each.
All the FI $75
Short block - free to good home, good home found
Wheels $200
1.8L heads pending sale. Sold
OEM 1.8L muffler $25


Make requests and offers.
Can deliver larger parts in the Socal or San Diego area for gas or bring to the R & G swap meet on April 25.

Bruce
http://img641.imageshack.us/my.php?image=dscf9612.jpg
http://img202.imageshack.us/my.php?image=dscf9613.jpg
http://img255.imageshack.us/my.php?image=dscf9614.jpg
http://img687.imageshack.us/my.php?image=dscf9615.jpg
http://img202.imageshack.us/my.php?image=dscf9620.jpg
http://img255.imageshack.us/my.php?image=dscf9609.jpg
http://img202.imageshack.us/my.php?image=dscf9610.jpg
http://img202.imageshack.us/my.php?image=dscf9611.jpg



Bruce
[/quote]

Posted by: wponting Jun 1 2010, 12:40 PM

do you still have the muffler?

Posted by: Silverstreak Jun 1 2010, 07:48 PM

Is the front bumper still available? Also the rear for that matter. I'm looking for painted ones.

Posted by: Geezer914 Jun 4 2010, 08:24 AM

I'll take the rear spoiler for $50. Shipping to NJ 08079?

How much for the set of lock cylinders? Any keys?

Posted by: buhs914 Jun 5 2010, 04:29 PM

Hey do you still have the windshield? and is it in decent shape?

Posted by: bdstone914 Jun 5 2010, 07:32 PM

I am not pulling this windshield as I would like to sett the car as a roller.
Bruce

Posted by: buhs914 Jun 5 2010, 07:58 PM

Ah ok thanks.