The one that comes from the body harness and plugs into the tray on the drivers side of the engine bay. Mine is broken beyond use.
Do you need the entire connector with wires in it or without?
If you want to make a trip down Billy. You are welcome to pull whatever wiring you need out of my 73
Another option is to get a Jeff Bowlsby restored harness, since the engine bay wiring's insulation & wrap gets pretty crusty due to engine heat!
Billy is converting his car to a 6, and he needs the 14 pin connector for the chassis harness.
Did your new engine harness get there today Billy?
I have the 14 pin connector (case only) if you will contact me.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)