Here is the body of a 75 that is going to the scrap yard.
Anyone who wants parts can come and get them.
I will hold onto this for about a week then its gone. It has a good driver side long.
Both rear suspension mounts are good.
Driverside floor is good. Trunk lid is ok. Hood is bad. both doors are very good. Whole rear clip is very straight.
All metal parts are free however you supply beer while cutting so I can supervise
It is on my lift so cutting will be easier. I will not have this on my lift for more than a few weeks this its history.
I will cut stuff out and ship it, But I really don't have the time so I will be charging 40/hour to cut, pack and ship. I have seen threads saying I should just give this stuff away and I am!!! But you have to come get it. Sorry but otherwise I am charging for my time. All parts left on the car are free if you come get them.
Rims are good with some minor rash. Tires were new when the rig was parked.
When that was, is anyones guess.
75 bucks includes rims, tires, lugs and 3 center caps.
[attachmentid=219
945][attachmentid
=219949]
Attached image(s)
Thats the way to do it !
Jake,
In the picture of where the relay board was.. there is a pig tail of a green wire and a yellow whiteish wire.. the plug on the end of that is what I am interested in.. is it a female plug with 2 holes for bullet ends? re: defrost plug end for the relay board? if so I would love to get that from you.. tell me what it is and what you want $$$ please.. Joe
Jim, whats the rear passenger fender (quarter panel) look like?
How is the front trunk floor? I need to patch mine after removing the air conditioning. I am nearby in Portland.
Thanks.
If the doors and windshield are still available I will pick the whole thing up on sunday.
What kind of beer do you like?
Doors are awesome!
Windshield is cracked.
Rear clip is going to MN.
Like all Micro beers except Fat Tire Mirror Pond is my Favorite.
Darn, Well if its ok then I would like to take those doors off your hands and that steering column too if you don't want it. Let me know and we can pm the details.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)