Printable Version of Topic

Posted by: detoxcowboy May 24 2010, 02:48 PM

WTB; Plug End (connector piece) for rear window defrost at relay board...

Posted by: type47 May 24 2010, 04:30 PM

hmm, never seen one!

Posted by: detoxcowboy May 24 2010, 06:08 PM

It is just a factory dual bullet connection, i saw one then did not want to buy the harness at the time, i rewired it up my self, works fine but for posterity would like to buy the factory fittement,,

Posted by: type47 May 25 2010, 06:54 AM

any pix?

Posted by: detoxcowboy May 25 2010, 08:01 AM

No picture, on the realy board there is an 2 prongs that take a connecor for the rear window defrost.. also an extra spot for a standard 5 prong relay that operates as a switch for that connection to the rear window defrost..

IN this diagram it is the connector plug for the yellow and red stripe wire and green wire in the upper left corner
just above relay #52 and next to the 2 fuses in the holder..

Posted by: jim_hoyland May 25 2010, 09:00 AM

Here's a picture that may help, someone probably has one and didn't know what it's for. Good Luck


Attached image(s)

Posted by: jim_hoyland May 25 2010, 09:02 AM

One more..


Attached image(s)

Posted by: detoxcowboy May 25 2010, 10:38 PM

Jake Oduole came through stong!! Got it..

Posted by: type47 May 26 2010, 09:26 AM

Nice pix of a part I'd never seen before. The plug is even keyed!