Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: 5.5"-6" fan
Posted by: yeahmag Jun 2 2010, 05:25 PM
Looking for a very cheap if not free fan to experiment with on my oil cooler. Needs to be 6" or less, push or pull - either is fine. Plenty of odds and ends to trade if you want to go that route.
-Aaron
Posted by: 9146986 Jun 2 2010, 09:48 PM
I don't know if it's any help, I've got a NOS Spal 7.5" puller, I'd take $45 for it plus postage, should fit in the $11 flat rate box. These are $65-75 now.
Posted by: bdstone914 Jun 2 2010, 09:50 PM
Aaron,
Talk to me Sunday about fans and oil coolers.
Bruce
Looking for a very cheap if not free fan to experiment with on my oil cooler. Needs to be 6" or less, push or pull - either is fine. Plenty of odds and ends to trade if you want to go that route.
-Aaron
Posted by: yeahmag Jun 2 2010, 11:25 PM
I have a Setrab 619 which is 5.5 x 11 roughly, so that wouldn't fit. Thanks!
I don't know if it's any help, I've got a NOS Spal 7.5" puller, I'd take $45 for it plus postage, should fit in the $11 flat rate box. These are $65-75 now.
Posted by: 9146986 Jun 3 2010, 06:44 AM
The Spal I've got is 7.5 diameter and only about 2" thick. Pic is small, but you should get the idea. They do make them in a 6", I think.
Posted by: yeahmag Jun 3 2010, 11:10 AM
Spal actually makes a 5.5", 5.2", and 4" fan(s). The 5.2 has the highest CFM of the three and is affordable. I'm just looking for something to do some testing with.
Posted by: tradisrad Jun 7 2010, 03:32 PM
Hello,
We have all types of car parts and in good condition.
Best Regards
Ms. Olga Zhdanova
Email 1: euroasia.supplies@mail.ru
Email 2: general.produkt@mail.ru
Email 3: euroasia.supplies@gmail.com
Email 4: euroasia80@hotmail.com
Skype ID: euro.asia.supplies
Nadezhda Gennadievna Isacheva Group.
Moscow, Russia
well there is your answer, get it from Russia!
Posted by: yeahmag Jun 7 2010, 03:33 PM
Damn... I should have known to get it from Russia.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)