Printable Version of Topic

Posted by: tornik550 Jun 5 2010, 12:47 PM

Just found that I have a huge crack in one of my intake manifolds for my dual weber 40 idfs. If anyone has either a single manifold or the pair available, please email me.

Thanks

tornik550@hotmail.com

Posted by: Rav914 Jun 5 2010, 03:19 PM

I have some manifolds that have been hanging around for a while. They're a little different:

46mm at the top
34mm at the bottom
5.5" tall
Drilled for both 3 and 4 bolt heads
Front and aft holes are in a shaft that's 2" long

I'll get some pics later.

Posted by: tornik550 Jun 5 2010, 07:40 PM

QUOTE(Rav914 @ Jun 5 2010, 05:19 PM)

I have some manifolds that have been hanging around for a while. They're a little different:

46mm at the top
34mm at the bottom
5.5" tall
Drilled for both 3 and 4 bolt heads
Front and aft holes are in a shaft that's 2" long

I'll get some pics later.

Posted by: Rav914 Jun 6 2010, 12:02 PM

Here's what they look like. See what I mean about how long the manifold bolts need to be. Let me know if you want them.

Nate




Attached thumbnail(s)

Posted by: Root_Werks Jun 7 2010, 01:23 PM

Nate, those have the castings for injectors!

Post them up for someone doing a MS or SDI system. Those are actually kinda hard to find.

Posted by: Rav914 Jun 7 2010, 04:27 PM

Thanks for letting me know. Cheers,

Nate

Posted by: tornik550 Jun 7 2010, 07:12 PM

Got a set- thanks to all