FS: 4 Fuch wheels: (2) 16x8 (944) and (2) 16x9 (930)
4 genuine Porsche Fuchs wheels. The ultimate setup for 911s and 914-6s. 16x8 944 fronts, 16x9 930 rears. I ran them with 225/50/16 and 245/45/16 tires, but no tires included. All are straight and true, and balance perfectly. Cosmetic details below:
(2) 16x8 genuine Porsche Fuchs, 951 362 117, 23.3mm offset. These were refinished by Al Reed about 4 years ago and still look near perfect. I'd give them a 9.9/10. They are concours ready.
(2) 16x9 genuine Porsche Fuchs, 911 362 119 00, 15.0mm offset. I bought these in this very good condition, and while not perfect, they were too nice to waste money on refinishing so I left them as-is. They've been in stored for a couple years and developed some spots on the polished surfaces that will polish off, but I wanted to leave that to the new owner. I'd give their cosmetics a 7/10 as-is, and I think with some work on the polished surfaces they'd be a 9/10. The black paint is in very good condition, but on close examination there are a couple chips and places where its peeling. As see that one of the 16x9 does have a long scratch on the outer rim from curb rash. See photos.
Also note, The 16x8 finished by Al Reed have a very slight frosted finish to them (not 100% polished) so they don't match the 16x9s perfectly, but it's very close. When on a car I didn't really notice at all. Again, see the photos. I wanted to point out all the flaws on these wheels so you know exactly what you're getting, but they really are in great shape and awesome wheels.
$3500 + shipping (OBO). Paypal ok.
Contact: steve@914.com
-Steve
> PHP Fatal error: Maximum execution time of 30 seconds exceeded in C:\Inetpub\www.914world.com\bbs2\sources\classes\post\class_post.php on line 2390
I'm getting lots of errors from 914world this morning, so here are some more photos:
http://forums.pelicanparts.com/porsche-911-used-parts-sale-wanted/554263-fs-4-fuch-wheels-16x8-944-16x9-930-a.html
I'll try and post more here later as well...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)