Printable Version of Topic

Posted by: bdstone914 Jul 25 2010, 09:33 AM

I just bought out a huge parts stash that includes 2.0, 1.8, 1.7 engines. transmissions, Brembo 4 piston calipers. 911 front and rear suspension, mufflers, wheels including 4 bolt Mahle, Boxster real and fake 4 bolt Fuchs and on and on and on. Also included are six (that is a quantity of six, not referring to the number of cylinders) good roller cars.
There is also a new Renegade V8 conversion kit with mounts, radiator , etc. I have not had time to go through all of the boxes to see what is there. There is a 1964 Corvette 327 V8 300 hp with some performance work and a 350 V8. Both have performance 4 barrel carbs and performance manifolds. I am researching the the 327 to determine the value. I do not think it have been used since worked over. One has a new Edelbrock carb, MDS distributor, the other has a Carter 4 barrel carb. The heads on the 327 are the camel hump type. Might be the 2.02.
The parts fill a 10 x 35 storage unit. I will picture and list items as I have time to go through what is there. Make an inquire and I will let you know what I have.
Bruce

Posted by: streetrover Jul 25 2010, 10:18 AM

Wow! Sounds like you hit the motherload! I'd be interested in that renegade radiator and perhaps the 911 suspension. Please post some pix and prices.

Bob

Posted by: jeeperjohn56 Jul 25 2010, 03:48 PM

Hey Bruce, Looking for a early front bumper in good shape and reasonable (cheap) price. John

Posted by: bdstone914 Jul 25 2010, 07:34 PM

The Renegade package cost about $3000 new. I will sell the whole package for $2,000 but not interested in breaking it up yet. It will be a while before I can get pics o most of the parts. The 911 suspension is the 3.5" caliper bolt spacing with the under body sway bar. It is $600 complete with stock A calipers. I have some 4 piston Brembo calipers with mono block adapters for more $$$. I have provide more details it you are interested.
Bruce

QUOTE(streetrover @ Jul 25 2010, 07:18 AM)

Posted by: Gint Jul 25 2010, 09:14 PM

When you're ready Bruce, please let me know all of the details and the price you want for the 327.

Posted by: bandjoey Jul 25 2010, 09:28 PM

A good reverse switch and Pin that goes on the side shift tranny?

Posted by: JRust Jul 26 2010, 11:12 AM

Let me know what u want on both v8 motors Bruce. I have everything for another v8 but the motor right now. Thanks for the help picking up my wheels too.

Posted by: tradisrad Jul 26 2010, 11:43 AM

i can use an early silver dot 120mph speedo
thanks
-Rob

Posted by: jsaum Jul 26 2010, 04:55 PM

Bruce,
Do you have any 1.8 cylinders? I may need a set.

Jsaum

Posted by: bdstone914 Jul 26 2010, 11:19 PM

I should have a set of 1.8L cylinders from another engine part out.

Make me an offer as to what they are worth to you. I also have a set of used flat top pistons that go with them. They are either Mahle or KS.

Bruce

QUOTE(jsaum @ Jul 26 2010, 01:55 PM)

Posted by: jsaum Jul 27 2010, 06:41 PM

QUOTE(bdstone914 @ Jul 26 2010, 10:19 PM)

I should have a set of 1.8L cylinders from another engine part out.

Make me an offer as to what they are worth to you. I also have a set of used flat top pistons that go with them. They are either Mahle or KS.

Bruce

QUOTE(jsaum @ Jul 26 2010, 01:55 PM)

Bruce,
Do you have any 1.8 cylinders? I may need a set.

Jsaum

Posted by: Lightweight_911 Jul 28 2010, 07:12 AM

Bruce - looking for a couple of original leather-rimmed steering wheels if you have any.

Email: andyjboy@hotmail.com

Posted by: CLynn85 Jul 28 2010, 08:21 AM

Bruce, I'm looking for a clutch fork and decent throwout bearing. Basically need everything pictured here:

http://www.autoatlanta.com/porsche-parts/porsche-914-parts/301-10.php

Thanks
Carl

Posted by: project-914 Jul 28 2010, 09:28 AM

Is the 911 front suspension complete?

if so, what struts and brake calipers are on it? and are you willing to ship?

thanks

Posted by: Al Meredith Jul 28 2010, 05:34 PM

Hey Bruce, This is Al in Atlanta, Ga and I'm still waiting for the Cad plated parts we agreed on many months ago. I hate to remind you on the open forum but I've been waiting for a long time. Though I would remind you before you start on this huge container project.

Posted by: EdArango Jul 30 2010, 02:42 PM

Hey Bruce...It's Ed in HB..It was great talking with you on the phone yesterday. I just wanted to re-cap a few of the things I'll be needing:

1. Complete front and rear 5-lug conversion kit.
2. Front sway-bar.
3. Rear trunk button
4. 150mp silver dot speedo with working odometer

I'm sure there is more stuff but we'll get to it later.

Thanks
ED

Posted by: 914_teener Jul 30 2010, 07:26 PM

Bruce,

Decided to start my 2056 project..... so..... decent 1.7 case and crank and 2 liter heads. I'll buy fresh cans and have everthing looked over and balanced.


Finished the trans I bought from you a while back with help from Dr. Evil.(Mike)

I'll look for the exhaust and injectors when I am done with the long block.

Still driving the snot out of my 1.7....just won't stop running ! I just want to start the other before it does...when it does if ever.

PM me if you like.

Rob

Posted by: arvcube Jul 31 2010, 12:35 AM

still have that yellow bumper and f/g bumper top?

Posted by: Zaney Aug 1 2010, 02:41 PM

Bruce,

I am looking for: the hardware for hanging a transmission using the 901 points in the rear of the car minus the mounts themselves. http://www.autoatlanta.com/porsche-parts/porsche-914-parts/302-05.php like #35 and #37 and other pieces not shown (if any)

Also, two 911 ('75 - '79) 100mm 6-bolt stub axles & two 911 ('69 - '73?) hubs, must have same bearing surface width as the 914 hubs

Thanks in advance!

Nate

Posted by: ArtechnikA Aug 1 2010, 02:54 PM

Need a matched pair of straight early 930 trailing arms; the torsion tube would be a nice plus. And halfshafts, as long as I'm wishing...