Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ need engine support bar

Posted by: almus Aug 7 2010, 10:01 AM

I need a engine support bar for my 1975 1.8

In the process of removing my motor/engine, the bolts that
pass through the support bar sheared off at the heads. The bar
would not come off even over the sheared bolts.
I sprayed, I prayed, I heated, I banged , cursed and prayed,

I then went through the three stages; denial, anger and finally acceptance.

And then cut the damn bar off.

So now I am looking for another bar.


I am in SE New Hampshire.

Let me know what you have.

Thanks

-Almus

Posted by: hwgunner Aug 7 2010, 10:05 AM

QUOTE(almus @ Aug 7 2010, 09:01 AM) *

I need a engine support bar for my 1975 1.8

In the process of removing my motor/engine, the bolts that
pass through the support bar sheared off at the heads. The bar
would not come off even over the sheared bolts.
I sprayed, I prayed, I heated, I banged , cursed and prayed,

I then went through the three stages; denial, anger and finally acceptance.

And then cut the damn bar off.

So now I am looking for another bar.


I am in SE New Hampshire.

Let me know what you have.

Thanks

-Almus

I have a nicely Powder coated one in black if you can not find one closer. It is $40.00 plus shipping. If you want it just PM me your shipping address and email address and i can send a paypal invoice. jonathan

Posted by: almus Aug 7 2010, 02:00 PM

> If you want it just PM me your shipping

I PM'd you. Let me know shipping and that the bar will fit
a 1975 1.8


Thanks

-A

Posted by: fitsbain Aug 18 2010, 08:36 AM

Is the 75 different from previous?

Think I have one you can have for $20

I can get it as far as Chesire CT at the end of the month.

Let me know.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)