Printable Version of Topic

Posted by: dougcoup Aug 8 2010, 02:51 PM

I have the following to sell.
73 1.8 FI complete. Tan interior, good glass, let me know what parts you want I will photo and quote price. or make offer with part you are requesting.

Also Weber 40IDA3C, I have set of manifolds for it but only 1 set of carbs and 3 horns. All for $175, or $75 for manifolds and $100 for rest.

Russell -6 fuel line with quick connectors 4 90degree, 4 straight, and 2 - 45 degrees. 25 ft of hose.

Also Weber/ITD air filter alterative. $50 for pair, of thse new out of box. I have run them on track and they run great and do a fine job. They are oiled just like K&N

Have 911 rear sepension to give you 5 lug. Have complete 914 suspension off my race car (old stock one) front/rear/swaybars/trailing arms and brakes and rotors (these are new as I ran it as a 4 lug for the 1st few events.). prices vary.
Steering rack and torrison bars available off 911 and 914

Have extra 914 headers 1 5/8 - $350



Attached thumbnail(s)

Posted by: dougcoup Aug 8 2010, 02:52 PM

wbers


Attached thumbnail(s)

Posted by: dougcoup Aug 8 2010, 03:02 PM

dd


Attached image(s)

Posted by: 914runnow Aug 11 2010, 10:10 PM

Hi there..Since 73 had 1.7 and 2.0..
Is this a transplant engine???
I am wanting FI from a 1.8 7 pin AFC system
EC Motor...Which would be a 1975 motor...
Probably a motor # first..
then we can go from there..
Thanx Rx

Posted by: koozy Aug 12 2010, 12:42 AM

I'll take all the Weber carb stuff for $175 please.

Posted by: koozy Aug 12 2010, 12:44 AM

How much for the fuel line stuff?

Posted by: PorscheKeene914 Aug 12 2010, 02:48 PM

What would you be looking for for the old 914 brakes, we just bought one that sat for 20 years in a garage and the calipers are gone.... (PM Sent)

Posted by: Nana's_914 Aug 15 2010, 12:06 PM

Do you have a rear swaybar for sale?

Posted by: NineOneFour Aug 16 2010, 10:51 PM

i am intrested in the 911 suspension for the back plus the brakes and brake backing plates how much for all of it? thanks for your time cory

Posted by: xperu Aug 17 2010, 05:06 AM

I'll Take the front swaybar. Thanks Mike

Posted by: 914runnow Aug 18 2010, 09:59 PM

QUOTE(914runnow @ Aug 11 2010, 08:10 PM)

Posted by: draganc Aug 20 2010, 06:40 PM

How much for all the Russell fittings and fuel line?
Thanks,
Dragan

Posted by: 914runnow Aug 28 2010, 07:45 AM

QUOTE(914runnow @ Aug 11 2010, 08:10 PM)

Posted by: dhkieffer Aug 28 2010, 08:00 AM

WTB (want to buy)

Does this car have a very good right rear inner trailing arm support console (the support console that extended from the frame to the support the inside end of the trailing arm closes to the engine)?

Posted by: Als914 Aug 30 2010, 12:42 PM

QUOTE(dougcoup @ Aug 8 2010, 01:51 PM)

Posted by: 6freak Aug 30 2010, 03:17 PM

whatta want for the washer and dryer ..just kid`n

Posted by: draganc Aug 30 2010, 07:39 PM

Still waiting for a price for the Russell fittings and fuel line.

I asked first