Want to be the fastest car in your neighborhood or local track?
For Sale: Professionally Built 2.7 Six Cylinder engine ( ZERO Miles)
Mag 7R case - all machine work done at J-B Racing (over $2,000)
Carrera RS Pistons & Cylinders
Goetze Piston Rings
Polished Crank
All new Bearings
ARP Rod Bolts
Machined Head Seal Surface ( Decked for higher compression - can still use PumpGas))
All new Valves, Valve Springs, Hardware
Cylinder Head Work, Valve Job, Guides replaced
Web 158R 4 Bearing Cams
Four Bearing Cam Houses
New Chains, Rails, Tensioners etc
New Oil Return Tubes
Rebuilt Weber Carbs ( Bieker)
PMO Tall Intakes
K&N Filters with RainShields ( will be replacing the Custom Carr914 Shields)
New Valeo Alternator from Pelican (internal Regulator)
Everything except an Oil Cooler
Builder projects motor to make 240HP based on other similar builds
$15,000 - Will sell without Carbs if requested
Britain! Look! You said you needed more horsepower.
Mark D.
I believe Brit's engine is just about the same as this one.
Very tempting...
I know I would be time and money ahead of the game (if 50 HP down) to do this instead of proceeding with my build. But that $20k step is a big one - mine is more like baby steps as the money trickles out instead of leaving in a big gulp...
Questions - no hurry on answers...
No flywheel, yes?
Webers - 40's or 46's ?
Stock 2,7 rods ?
Original head studs ?
Original 2,7 oil pump or something newer/updated ?
What's the 158R cam 'like' - E, S, Solex ... ? I've got a bookmark to the Web Cam site somewhere but I'm just looking for a ballpark characteristic...
If we get closer I'd want to know more about the case work, but at the moment I just have my nose pressed to the storefront glass...
No I don't have a good Flywheel ( at least I don't think I do, I know I have one with no life left in it)
Webers are 40's rebuilt by Bieker. I think 46's would be way too much. I've got PMO 46's on my 2.8 Twin-Plug.
Stock 2.7 Rods that were examined & polished
New Studs when Case work was done
3.2 Oil Pump
The Cams are ones that I traded my builder for when I converted to 4 Bearing Cam Houses. I will have to get with him for the profiles.
I may have a Dizzy - I have to dig.
I will be more than glad to put you in touch with my Builder to discuss the Case work or the build itself. Probably the most prominent Engine Builder on Pelican.
And like you said, you will be money & TIME ahead. There is a guy on Pelican selling 2.7 engine parts that when totalled come out about $13k, but then you have to do case work, head work, buy more parts and do installation.
T.C.
Studs are Porsche Steel units
WebCam is not open for another hour, but according to their Website 158
Valve Lift
.450/.400
Duration
250/240
Duration @ 0.050
232/222
My Engine Builder has building Porsche Race motors for longer than I have known him ( > 25 years). He is the Engine Room Manager at one of the finest shops in the country. He has built a Type IV that I couldn't kill, a 2.5 Twin-Plug, my 2.8 Twin-Plug and this motor. His motors are in HSR, IMSA cars. He has a 962 motor on his bench right now.
The Case work included;
Shuffle-Pinned
Oil Mods
Screw-in Piston Squirters
Time certs/ Case Savers
I could deliver to PA for some gas money ( not much, the motor will fit in my Honda Civic hatchback) as I do need to see my Mom who is in a Home in Upstate NY with Alzheimers.
T.C.
Rich & others,
I have an offer on the motor that I'm considering , so there is still a small window of opportunity for someone to get in under the wire.
T.C.
New Lower price exclusively for the World. I think $20K scared off some people. And I have had Two Deals go Sour.
I have my 2.8 Twin-Plug motor (if someone wanted that, I would take an offer of over $50K) arriving from the same builder very soon. I need my engine stand for that. Also I'm going to buy a car from a fellow member here, so I need the $$ too complete that deal.
Crateing & International Shipping Available
Can deliver as far as Atlanta (during Petit LeMan week)
Here is the Cam Card with full info
The Motor is no longer For Sale. I'm building a new Race Car around it.
Back up For Sale, The Race Car is going
T.C.
This must mean you are now able to afford a race car somehow?
Paul, Still waiting on my other deal. But you are getting to far ahead of me in pictures that I have to try to give you some competition on the track.
Plus I think I have enough parts to build 3 race cars
T.C.
Bring it on....
Just got too much on my Plate so the Motor is Back up For Sale @ a Lower Price
$15k or BO
T.C.
Today's pm's answered
T.C.
Sale Pending
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)