I am parting out a mostly complete 1972 with original fuel injection. I have not tried to start the car yet but it has not been registered since 1985. I will be digging into it this weekend to start stripping it. There are a lot of decent parts on it, nothing concours. I will be keeping some of the good interior parts and some various other small parts. I know I need some pictures and I will get some posted tomorrow night after work. I just wanted to get this posted to get started. The chassis is pretty much destroyed but there might be some usable metal on it. Let me know what you need and I can send pictures and price.
I will look when i get home. But i think it is cracked. I will let you know.
Here are some pictures I took. I plan on keeping the passenger seat and back pad(unless someone want to trade for a 1970 backpad and passenger cusion). I also plan on keeping the windshield trim, and a few other small components (Not completely sure until I tear into it more. Let me know what you want. Also, The upper dash pad is cracked, but the lower knee pad area is in good condition. I also have a shelving unit with a bunch of parts including gold PORSCHE lettering and gold 914 numbers.
I would love to have the Drivers side tail light panel from the lock to the fender ,top to the floor pan....if you could cut that section out.
Maybe the passenger rear fender also??
My car was in a wreck and repaired poorly.
Please PM me
Here is some pricing, I will post more as I tear it down. Let me know if I am way off, I am not too sure. I will send better pictures if you are interested, just PM me your email and what you want.
OK Visor pair: 30
Outer black threshold plates: 20 pair
Front windshield: 100
center console(probably missing some hardware): 100
rear window: 50
Full motor with FI (running condition unknown): 300
Five bolt spacer adapters: 75
Oil bath filter housing from 1970: 50
Gold PORSCHE letters (no speed nuts): 40
How are the front and rear bumper pads? If the cores are not trashed, I may be interested.
The bumper pads are pretty trashed. I wasn't going to even try to sell them.
I am in Ft Wayne and very interested in the engine. Could you tell me what size it is? Thanks, Bret
I am sure the engine is a 1.7 liter. I doubt it is not the original. I don't know condition of it since it has not ran in a long time.
have you had it running? Could I come check it out anytime soon?
I just emailed ya. Wanted to make sure you got it.
Got it and replied.
Engine and FI are sold. I still have a lot of parts.
Doing some part stripping for some people tomorrow morning. Anybody else need anything? I have a ton of parts still. Make me an offer on prices already listed.
left outer strut housing 70 1.7? split bottom caliper legs straight
how much for steering wheel???
could i trouble you for some pictures of both the sun visors? Im looking for a decent pair with the 3 clips.
Also looking for the handbrake button thing, you screw it on the handbrake. Mine doesn't have any thread so it keeps slipping off
Sorry I have not been around to respond lately. I am starting a new job in 2 weeks so I have been busy wrapping things up at my old job. I am going on vacation next week, but then I have the entire week after that off. I probably won't have time to get to anything until after my vacation. Once I get back I will make sure to get back to everyone.
Just got back from vacation. Anybody who wanted anything just send me an email with what you wanted so I can send you some pictures and prices. My email is kevin.augsburger1@gmail.com.
greetings, would you have a right front heater tube and bracket from the long?
Many PM's sent. Anybody else need anything? I am trying to get rid of all of the big stuff to get this car out of my garage.
Here is some pick up only stuff that I want to get out of the garage:
Good clean windshield - $75
tail shift tranny (condition unknown) $50
Rear windshield (will possibly ship) $50
1 passenger and 1 driver side seat with mounting brackets (basic cores only) $25 each
Targa top (no seals, needs refinished) $50
2 cookie cutter wheels with tires (need heavy cleaning and probably painted) $50 pair
multiple steel wheels (need blasted and painted) $10 each
I will post more when I can. Send me an email with what you want and I will send you pictures.
Kevin.augsburger1@gmail.com
I am trying to get this car out of my garage before winter comes.
There are no locals that need anything? Anybody else need anything. I still have a lot of OK parts.
I have not been around lately but I am back now. Trying to get rid of a lot of parts before winter hits. Any body need anything? If I have not responded to a request just let me know.
Do you still have the firewall shift linkage boot? (tail shifter)
Thanks, Rob
Looking for wiring harness section, the bundle that comes up from underneath the dash on the drivers side into the trunk just below the windshield corner....it splits off some goes over towards the passenger side, and some goes down into the spare tire well area. Mice have eaten mine and looking to get a decent section to splice in.
I'll try and send a pic tomorrow so you know what section I mean exactly.
Hi,
if you still have it i'd be interested in the vent windows if the chrome & rubber are in vg shape,
Cheers
I'm looking for 2 license plate lights. Do you have any?
how is the drivers side map pocket and armrest?
-chad
Sorry I have not been around, Just had shoulder surgery last week. I have no bumpers left, no license plate lights, Have the vent windows but I will have to check on the condition of the rubber (Wont be able to get to them with one arm for a week or 2, email me to remind me kevin.augsburger1@gmail.com), I will have to check on the map pocket and armrest but probably not great (also email to remind me please). If I have not responded to anyone please email me.
I need the linkage that goes between the fire wall and the transmission any hope
Hey, looking for driver's side outer door handle?
Looking for a steering wheel and rear sway bar w hardware, Thanks
No outer door handle, No steering wheel, No rear sway bar, All of the other parts I will check on this weekend. Please email me to remind me. Kevin.augsburger1@gmail.com It is easier for me to keep track of everything that way.
What wheels does (or did) it have? I'm looking for a set of lug bolts. PM me.
Hi, can you see if there is any rust on panel behind front bumper and how much for it with head light buckets and supports to innerfender wells? Thanks
Need the pass. side speaker housing. Looking for one without cracks and with good mounting threads for the speaker. Thanks, Ray
The chassis is gone so I don't have any panels left, just a bunch of parts. No wheels, it just had steel wheels on it and I don't have any extra lugs. No crankcase hose connector. I might have the speaker housing, I will look today.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)