Printable Version of Topic

Posted by: jaybird840 Sep 30 2010, 06:30 PM

After 2 1/2 years of converting my car to a six, I'm about ready for light off. I need one "CV plate" which is the little bracket that yokes two CV bolts together. Somebody has to have one in a bin somewhere.

Also, check your parts stashes as I may be in need of a shift rod for a side shift tranny. I boxed mine up and mailed it to Perry Kiehl over two weeks ago for him to modify it for a six install. USPS has "misplaced" it--unfortunately, it had new bushings in it. They are basically cores for Perry to work his magic on, so if you've got one that's bent, that's OK as long as the ends are undamaged. I'm down to the last few shillings in my project budget (that is several thousand $$ over-budget ), so be gentle.

After 30 months, it's nearly time for Weber music!!!!

-Jaybird

Posted by: tscrihfield Sep 30 2010, 07:06 PM

QUOTE(jaybird840 @ Sep 30 2010, 08:30 PM)

After 2 1/2 years of converting my car to a six, I'm about ready for light off. I need one "CV plate" which is the little bracket that yokes two CV bolts together. Somebody has to have one in a bin somewhere.

Also, check your parts stashes as I may be in need of a shift rod for a side shift tranny. I boxed mine up and mailed it to Perry Kiehl over two weeks ago for him to modify it for a six install. USPS has "misplaced" it--unfortunately, it had new bushings in it. They are basically cores for Perry to work his magic on, so if you've got one that's bent, that's OK as long as the ends are undamaged. I'm down to the last few shillings in my project budget (that is several thousand $$ over-budget ), so be gentle.

After 30 months, it's nearly time for Weber music!!!!

-Jaybird

Posted by: 914Sixer Sep 30 2010, 07:33 PM

I will be back in town Monday. I have all the cv joint plates you need. Send address and I will send one all the way from Boerne.