Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB For '74 1.8

Posted by: Peter Zimmermann Oct 25 2010, 09:52 AM

I'm looking for the upholstered interior back pad that fits a car with adjustable seats. It must be black, no breaks/cracks at the harness inertia reels, no cuts, punctures or water damage.

I will also buy just the back pad board if you have one in good condition (all four clips intact, etc.)...

I also need the engine compartment harness (12-pin connector at relay board to heater blower, back up switch, starter solenoid, etc.) for the same car ('74 1.8 USA model). I HAVE FOUND ONE OF THESE, WILL POST CONDITION UPON RECEIPT!

Pete Zimmermann

Posted by: rdauenhauer Oct 25 2010, 03:51 PM

QUOTE(Peter Zimmermann @ Oct 25 2010, 08:52 AM) *

I'm looking for the upholstered interior firewall pad that fits a car with adjustable seats. It must be black, no breaks/cracks at the harness inertia reels, no cuts, punctures or water damage.

I also need the engine compartment harness for the same car ('74 1.8 USA model).

Pete Zimmermann


Do you mean the FI , ignition harness or both for a 74 1.8L ?

Posted by: Peter Zimmermann Nov 8 2010, 03:41 PM

QUOTE(rdauenhauer @ Oct 25 2010, 02:51 PM) *

QUOTE(Peter Zimmermann @ Oct 25 2010, 08:52 AM) *

I'm looking for the upholstered interior firewall pad that fits a car with adjustable seats. It must be black, no breaks/cracks at the harness inertia reels, no cuts, punctures or water damage.

I also need the engine compartment harness for the same car ('74 1.8 USA model).

Pete Zimmermann


Do you mean the FI , ignition harness or both for a 74 1.8L ?


The harness that connects to the relay board with a 12-pin connector...but I found one.

Sill looking for a nice back pad complete with board!

Posted by: Peter Zimmermann Nov 10 2010, 07:38 PM

QUOTE(Peter Zimmermann @ Nov 8 2010, 02:41 PM) *

QUOTE(rdauenhauer @ Oct 25 2010, 02:51 PM) *

QUOTE(Peter Zimmermann @ Oct 25 2010, 08:52 AM) *

I'm looking for the upholstered interior firewall pad that fits a car with adjustable seats. It must be black, no breaks/cracks at the harness inertia reels, no cuts, punctures or water damage.

I also need the engine compartment harness for the same car ('74 1.8 USA model).

Pete Zimmermann


Do you mean the FI , ignition harness or both for a 74 1.8L ?


The harness that connects to the relay board with a 12-pin connector...but I found one.

Sill looking for a nice back pad complete with board!


Rec'd my harness today, it's definitely enough to work with, I'll have to add some shrink tube here and there, and put new W-crimp connectors in a few places (coil and starter solenoid), but it was well-described by the seller and will save me many hours trying to figure out just what the heck a PO thought he was doing!

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)