Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: Lots of misc. interior & exterior

Posted by: Cheapsnake Jan 4 2011, 08:38 PM

after two years and 3 parts cars it's time to clean out the shop. Everything I'm listing is serviceable, maybe needing a bit of cleaning but otherwise good to go. If you need detail pics of anything send me an email at ffr2776@sbcglobal.net. Please don't PM for pics cuz this PM board doesn't support uploading of pics.

I'll be posting more stuff over the next couple of days. If you don't see what you need just ask. I want this stuff to go so if you don't like my price make me an offer I can't refuse.

Attached Image
Steering wheels/horn rings - one needs a recover, $25+sh, one is bare plastic, $35+sh, one is vinyl covered in VG condition, $65+sh
Shift levers
- (2) sideshift, (1) tailshift, all tight, $15 each+sh.

Leather shift boot - VG cond, $10 shipped

Interior light
- slight nick on edge but otherwise solid, $10 shipped

Heater controls - complete with chrome trim, unfaded, $25 +sh

Seat belts[/b]
- out of a '71, some rust at attachment points, $15+sh

[b]Steering column ign & switches
- got four of them, one out of a 71 (no key or lock), 73 & 74, with key, $45+sh

Wiper switch
- out of a '71, $15 shipped

Ash trays - $10 shipped

Attached Image
Center console
- partial, vinyl is torn at upper front corner, no gauges, $50+sh

DS Map pockets
- kinda crappy at attachment points but lids are good, $20+sh

PS door pulls
- good cond., $15+sh

Upper windshield facia - good cond, $25=SH

Not shown
- bunch of interior trim (all black), pillar trim, 5 ea+sh, '73 lower dash, $25+sh, DS door panel, $35+sh, more that I can't remember

Attached Image
Front bumper top - two studs were replaced, a bit crunchy but cosmetically good $75+sh

DS mirror
- not sure if it's a genuine 914 or not but it's pretty cool, I'd keep it if it had a match, $25 shipped

License plate bracket - $15 shipped

Sail Panel trim
- two pairs, one pair is in pretty good shape, but has some minor issues (email for detail pics), $60 shipped, the other set is kinda rough but if you want to clean them up and paint them they'll work for you, $25 shipped

DS fog light grill
- chrome is shot but it's complete and solid, $25 shipped

Front body plugs
- about a dozen, $10 shipped

Bumper tits[i] - all but one of the studs are gone, $15 ea+sh. I can restud them for $5/stud

See bottom post for more stuff added. and don't forget to ask.

Tom

Posted by: Lennies914 Jan 4 2011, 08:48 PM

I'm interested in the interior light. can you send me a pic?

Thanks

Posted by: Jeffs9146 Jan 4 2011, 09:20 PM

I need a passenger side tail light and housing!

Posted by: ppetion Jan 4 2011, 10:20 PM

QUOTE(Jeffs9146 @ Jan 4 2011, 10:20 PM) *

I need a passenger side tail light and housing!

send me paypal instructions with shipping to 11580 for the Upper windshield facia - good cond, $25=SH


Posted by: BarberDave Jan 5 2011, 05:15 AM

smilie_pokal.gif

P M. sent on console & shifter boot ! Dave slap.gif

Posted by: Cheapsnake Jan 5 2011, 07:47 AM

QUOTE(Lennies914 @ Jan 4 2011, 06:48 PM) *

I'm interested in the interior light. can you send me a pic?

Thanks

need an email sent to ffr2776@sbcglobal.net and I'll return with a pic.

Tom

Posted by: underthetire Jan 5 2011, 10:01 AM

QUOTE(Jeffs9146 @ Jan 4 2011, 07:20 PM) *

I need a passenger side tail light and housing!



Housing is still on that '70. No lens though. You know how to get it if you want it smile.gif

Posted by: indianmort Jan 5 2011, 10:22 AM

i will take interior light if still available. thank you.

Posted by: Cheapsnake Jan 5 2011, 12:07 PM

QUOTE(Jeffs9146 @ Jan 4 2011, 07:20 PM) *

I need a passenger side tail light and housing!

I've got two PS housings, one is cracked with OK reflectors and the other is solid with crap reflectors. Lenses are shot. If you want to try to patch these together I'll ship both to you for $20.

Tom

Posted by: Jeffs9146 Jan 5 2011, 12:15 PM

Thanks Tom,

Underthetire is close to me so let me see what they have. I need the passenger side housing and lens, my insides are clean!

Posted by: Super90 Jan 5 2011, 02:48 PM

Hi, sent you an email this earlier AM for the good steering wheel. Pls let me know. Thanks. George

Posted by: Cheapsnake Jan 5 2011, 02:52 PM

QUOTE(Super90 @ Jan 5 2011, 12:48 PM) *

Hi, sent you an email this earlier AM for the good steering wheel. Pls let me know. Thanks. George

got it, will email a pic tonight.

Tom

Posted by: adidas Jan 5 2011, 04:25 PM

Hi Tom. Interested in the front bumper top. Thanks Bill

Posted by: Cheapsnake Jan 5 2011, 07:39 PM

QUOTE(adidas @ Jan 5 2011, 02:25 PM) *

Hi Tom. Interested in the front bumper top. Thanks Bill

Hey Bill, PM sent.

Tom

Posted by: Lennies914 Jan 5 2011, 10:20 PM

paypal sent for interior light

thanks tom

Posted by: Cheapsnake Jan 6 2011, 01:28 PM

More stuff for your consideration:
Attached Image
Set of used Mahle 94mm P&C's. These came out of a project car engine that was rebuilt by the PO. I don't know the reason for the rebuild but these things sure don't look like they were the reason. They're very clean and crosshatching is still there. I couldn't bring myself to scrapping them out so if you have a home for them and can handle 65 bucks, they're yours, shipping included.SOLD
Attached Image
Two ONE rain trays - both are in pretty good condition although I did some minor repairs that you can just make out on the left side of each. All bolt holes are intact and crack free. $60 each, shipped. Rain tubes are completely intact and will go with whichever sells first if the buyer wants them. Otherwise, they are for sale for $20, shipped if someone gets to them before the rain trays sell.

Attached Image
FI system for 1.8L. I pulled this off a parts car so never heard it run. PO said the car was running a couple years ago so you can take that any way you want. I think it's complete, but look closely at the picture to determine for yourself. $100 + shipping. Give me a couple days to see if I can sell this stuff whole before asking to part it out.SOLD
...more to come.

Tom

Posted by: Markl Jan 7 2011, 04:26 AM

Sending PM for P&Cs and FI

Posted by: Cheapsnake Jan 9 2011, 01:23 PM

Just ran across these peaker grills while looking for something else. They are absolutely crack and blemish free. Speakers are shot. $50 + sh.

Attached Image

Attached Image

Posted by: matteyp Jan 14 2011, 04:36 AM

I'm interested in those speaker grills. How do they fit?

Posted by: Cheapsnake Jan 14 2011, 10:16 AM

QUOTE(matteyp @ Jan 14 2011, 02:36 AM) *

I'm interested in those speaker grills. How do they fit?

They're stock, fit just fine.

Tom

Posted by: wertygrog Jan 17 2011, 01:22 AM

Hi, I'd like a nice ashtray and one of the side shifter assemblies, assuming the chrome is good and the reverse lockout plate is not worn. If you're not sure about the reverse lockout plate, please send a pic of the bottom of the shifter to wertygrog AT msn DOT com. If it's good, email or pm me with what you'd like for these items with shipping to 92029. Thanks! smile.gif

Posted by: Cheapsnake Jan 17 2011, 11:25 AM

QUOTE(wertygrog @ Jan 16 2011, 11:22 PM) *

Hi, I'd like a nice ashtray and one of the side shifter assemblies, assuming the chrome is good and the reverse lockout plate is not worn. If you're not sure about the reverse lockout plate, please send a pic of the bottom of the shifter to wertygrog AT msn DOT com. If it's good, email or pm me with what you'd like for these items with shipping to 92029. Thanks! smile.gif

Both sideshifters are gone (guess I ought to update). PM sent on ashtray.

Tom

Posted by: matteyp Jan 23 2011, 06:16 AM

Tom I'll take that map pocket. Also looking for a fog and defrost switch if u have either could u let me know. I found a door pull so I don't need that anymore. Thanks

Matt

Posted by: Cheapsnake Jan 23 2011, 07:17 AM

QUOTE(matteyp @ Jan 23 2011, 04:16 AM) *

Tom I'll take that map pocket. Also looking for a fog and defrost switch if u have either could u let me know. I found a door pull so I don't need that anymore. Thanks

Matt

pm sent.

Posted by: ScottD914 Jan 23 2011, 07:33 AM

PM sent on int. windshield trim.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)