Printable Version of Topic
914World.com _ FS/WTB: 914 Parts _ Parting out '74 body parts
Posted by: detoxcowboy Jan 8 2011, 07:14 PM
Are you parting anything off that tub? or is it just for the body farm? Is it trached? How is that radio? what is that radio? Shift knob? Centerconsole harness?? Lighter? Sigla Windsheild? any good? looks good? I can see your in Florida so maybe the humidity as killed everything but just throwing it out there,..
Posted by: watsonrx13 Jan 8 2011, 07:41 PM
QUOTE(detoxcowboy @ Jan 8 2011, 08:14 PM)
Are you parting anything off that tub? or is it just for the body farm? Is it trached? How is that radio? what is that radio? Shift knob? Centerconsole harness?? Lighter? Sigla Windsheild? any good? looks good? I can see your in Florida so maybe the humidity as killed everything but just throwing it out there,..
I don't know what kind of radio or whether it even works. The windshield is cracked. No center console, therefore no harness. Shift knob is cloudy. I'm going to pull the suspension and wiring harness off the car before it goes to the crusher.
-- Rob
Posted by: hot_shoe914 Jan 8 2011, 09:57 PM
I could use that tach for my LE if it works.
Posted by: detoxcowboy Jan 8 2011, 11:02 PM
this member is looking for a cowl and front trunk..
http://www.914world.com/bbs2/index.php?showtopic=114418
Posted by: Montreal914 Jan 9 2011, 12:27 PM
Hi Rob,
If you are willing to cut the door sill up to the serial number tag so I can fix my car that would be great. I'm on a limited budget...
Thank you,
Eric
Posted by: watsonrx13 Jan 10 2011, 06:22 AM
QUOTE(Montreal914 @ Jan 9 2011, 01:27 PM)
Hi Rob,
If you are willing to cut the door sill up to the serial number tag so I can fix my car that would be great. I'm on a limited budget...
Thank you,
Eric
Eric no problem. Give me a couple of days to get it cut out (we've got rain coming this afternoon). How does $15 sound, including shipping?
-- Rob
Posted by: watsonrx13 Jan 10 2011, 09:01 AM
QUOTE(hot_shoe914 @ Jan 8 2011, 10:57 PM)
I could use that tach for my LE if it works.
Let me check to see what I have in my stash and I'll get back to you.
-- Rob
Posted by: hot_shoe914 Jan 10 2011, 09:16 AM
QUOTE(watsonrx13 @ Jan 10 2011, 09:01 AM)
QUOTE(hot_shoe914 @ Jan 8 2011, 10:57 PM)
I could use that tach for my LE if it works.
Let me check to see what I have in my stash and I'll get back to you.
-- Rob
Thanks
Posted by: Montreal914 Jan 10 2011, 09:43 AM
QUOTE(watsonrx13 @ Jan 10 2011, 04:22 AM)
QUOTE(Montreal914 @ Jan 9 2011, 01:27 PM)
Hi Rob,
If you are willing to cut the door sill up to the serial number tag so I can fix my car that would be great. I'm on a limited budget...
Thank you,
Eric
Eric no problem. Give me a couple of days to get it cut out (we've got rain coming this afternoon). How does $15 sound, including shipping?
-- Rob
Thank you Rob. At this price, I will pay shipping. Sending PM.
Thank you,
Eric
Posted by: zy84 Jan 10 2011, 11:02 AM
Hello I am the member looking for a cowl section. Is this one mostly rust free can't really tell from the pics that are posted.
Thanks
Posted by: watsonrx13 Jan 10 2011, 12:25 PM
QUOTE(zy84 @ Jan 10 2011, 12:02 PM)
Hello I am the member looking for a cowl section. Is this one mostly rust free can't really tell from the pics that are posted.
Thanks
When you say cowl section what are you refering to? Can you take one of the pics and circle the section you'll want?
-- Rob
Posted by: t collins Jan 10 2011, 03:49 PM
Hi Rob,
How about the front trunk hood release cable w/housing?
Thanks, Tom
Posted by: zy84 Jan 10 2011, 04:07 PM
It is the section between the windshield and the front trunk where the wipers are attached. It goes from fender to fender.
Posted by: 914dave Jan 10 2011, 09:09 PM
I'm looking for a section of the drivers fender and front panel. Your car looks pretty good. I need it from the headlight bucket forward including the front panel behind the bumper mounts. Is it available?
Dave
Posted by: watsonrx13 Jan 11 2011, 06:23 AM
QUOTE(914dave @ Jan 10 2011, 10:09 PM)
I'm looking for a section of the drivers fender and front panel. Your car looks pretty good. I need it from the headlight bucket forward including the front panel behind the bumper mounts. Is it available?
Dave
Dave do you have a pic of your car I can use as a reference? How much do you need from the blinker towards the door? How much toward the center do you need? I assume you want the complete bumper bracket. I'll take some pics today from the top, bottom and side and check for rust.
-- Rob
Posted by: watsonrx13 Jan 11 2011, 03:46 PM
QUOTE(zy84 @ Jan 10 2011, 12:02 PM)
Hello I am the member looking for a cowl section. Is this one mostly rust free can't really tell from the pics that are posted.
Thanks
Here's a http://www.tampabay914.com/Parts/PARTS.HTML to my website showing the cowl area. You can click on the pics to enlarge. There is some rust where the window sits and in the corner on the passenger side. Let me know if you're still interested before I cut it out.
-- Rob
Posted by: watsonrx13 Jan 11 2011, 03:50 PM
QUOTE(914dave @ Jan 10 2011, 10:09 PM)
I'm looking for a section of the drivers fender and front panel. Your car looks pretty good. I need it from the headlight bucket forward including the front panel behind the bumper mounts. Is it available?
Dave
Dave here's a http://www.tampabay914.com/Parts/PARTS.HTML to my website showing the headlight housing and front fender. You can click on the pics to enlarge. There is some rust in the channel area. Let me know if you're still interested before I cut it out.
-- Rob
Posted by: watsonrx13 Jan 11 2011, 03:52 PM
QUOTE(Montreal914 @ Jan 9 2011, 01:27 PM)
Hi Rob,
If you are willing to cut the door sill up to the serial number tag so I can fix my car that would be great. I'm on a limited budget...
Thank you,
Eric
Eric here's a http://www.tampabay914.com/Parts/PARTS.HTML to my website showing the door sill. You can click on the pics to enlarge. There is a minor rust hole and a slight dimp in the sill. Let me know if you're still interested before I cut the piece out.
-- Rob
Posted by: watsonrx13 Jan 11 2011, 03:58 PM
QUOTE(hot_shoe914 @ Jan 8 2011, 10:57 PM)
I could use that tach for my LE if it works.
Shoe here's a http://www.tampabay914.com/Parts/PARTS.HTML to my website showing the best of the tachs with the black button (first pic). You can click on the pics to enlarge. It has a small chip on the glass/plastic just above and to the right of the vdo lettering. Let me know if you're still interested.
-- Rob
Posted by: 914dave Jan 11 2011, 05:22 PM
QUOTE(watsonrx13 @ Jan 11 2011, 01:46 PM)
QUOTE(zy84 @ Jan 10 2011, 12:02 PM)
Hello I am the member looking for a cowl section. Is this one mostly rust free can't really tell from the pics that are posted.
Thanks
Here's a http://www.tampabay914.com/Parts/PARTS.HTML to my website showing the cowl area. You can click on the pics to enlarge. There is some rust where the window sits and in the corner on the passenger side. Let me know if you're still interested before I cut it out.
-- Rob
Rob,
If you can cut it a minimum of 3" behind the headlight bucket down into the wheel arch anywhere. Then cut the inner fenderwell thru the headlight bucket down to the front. The inner fenderwell, headlight bucket and bumper bracket are good on mine. It was rusted between the dogbones and the bumper bracket on the front panel. The fender was rusted below the turn signal hole and the seam between the front panel and the fender. I plan on grafting both pieces on at the same time. I can drill the welds where it attaches to the inside of the headlight bucket. How much do you want? Do you do paypal?
Thanks
Dave
Posted by: watsonrx13 Jan 11 2011, 08:32 PM
QUOTE(t collins @ Jan 10 2011, 04:49 PM)
Hi Rob,
How about the front trunk hood release cable w/housing?
Thanks, Tom
Tom let me check tomorrow on the hood cable and housing.
-- Rob
Posted by: watsonrx13 Jan 17 2011, 06:01 PM
Update on requests:
t_collins: I have removed the front trunk release w/cable and housing, ready to ship.
914dave: I got your message that you're going to look at a local car.
hot_shoe: tach works, ready to ship
montreal914: door sill cut out, ready to ship
zy84: no response to this ad or PM
-- Rob
Posted by: watsonrx13 Jan 23 2011, 09:16 AM
Update on requests:
t_collins: I have removed the front trunk release w/cable and housing, ready to ship. Paid for and shipped Sunday
914dave: I got your message that you're going to look at a local car.
hot_shoe: tach works, ready to ship. No longer wanted
montreal914: door sill cut out, ready to ship. Paid for and shipped Friday
zy84: no response to this ad or PM
-- Rob
Posted by: bcheney Jan 23 2011, 09:28 AM
Rob, Is the engine firewall in good shape? I have been debating on cutting an access hole in mine so that I can get to my six engine fan and belt easily...whenever I get the motor in the car!! I would only need the center section. Can you send me a pm with your phone number? Or you can reach me at 407 468 6933. Thanks,
Posted by: bcheney Jan 24 2011, 09:01 AM
Rob, Here is a photo of the area I am interested in. You can see the outlined area. It doesnt need to be exactly this size but something close that could be trimmed to fit. Call me if you have a question. Thanks again for contacting me this morning.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)