SOLD, THANKS BILL!
Zero time 2056 motor assembled by European Motor Works/Scat 9/09 have receipt
Balanced 96mm NPR pistons/cylinders
Balanced crank, rods and flywheel
New Stock T4 cam & followers
Galley plugs replaced, case align bored
Heads rebuilt, cracks welded up.
Tons of NOS FI parts
- NOS ECU (still in it's factory box)
- NOS MPS (vacuum checked)
- NOS TPS
- Injectors (4 NOS, 4 rebuilt by Witchhunter)
- Many more
Powdercoated Tin and zinc plated parts
Near new SSI HE's
Triad exhaust
New fuel hoses
Fuel pump
Alternator
All new Bowlsby & OEM wire harnesses
Many more items
It presently sits as a long block as I haven’t had time to assemble it, decided to go with a six conversion. I had planned to keep it fuel injected so I kept the stock cam.
$3800 As described + shipping
$3200 without SSI and Triad +shipping
Prefer not to ship, I'm in Long Beach, CA.
Kev
Kevin,
do you have pics of the various pieces and the long block?
Is this motor built on a GA case?
Do you know what the compression ratio is supposed to be?
thanks Kevin...
are you offering everything to complete the build into a running motor?
glad my old motor inspired someone
Hi...could you please post some pics of the engine?
Cheers
Mike
Few more photos of misc stuff...
Balanced piston
Thanks for the pics...what happened to the other cylinder head?
Mike
Steve & Mark you have a PM.
Kev
When assembled this is a complete motor. EVERYTHING as close to a factory new motor you will find even down to the wire harnesses!
kev
for the clean job, .. you can ship Engines to Jersey.. If you ever part that FI, I wantr to be first in line and to your house with cash.. local for the moment O.C.
Few more photos of FI gems and the like...
Kev
MikeM...you gotta PM.
Kev
Bill, you've got a email reply too.
Kev
i have $100 bills with your name on them check e mail
SOLD
Kevin...I'm still pissed off. Just kidding...
Good luck with your 6 conversion.
Mike
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)