Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: 2.0 **ZERO** miles engine w/ EVERYTHING!
Posted by: RiqueMar Jan 24 2011, 05:07 PM
Up for sale is an engine I was originally going to put in my car before coming across a /6 3.0ltr. Ready to put in your car and GO!
Asking $3,000 OBO.
-Powder Coated wrinkle black sheet metal (Already on the car)
-Balanced engine
-Carbs (Webers)
-Blue Coil
-Painted fan shrowd
-2.0 Heat exchangers (sand blasted and painted exhaust black)
-Magnaflow Muffler (4-in-1-out)
-Side Shift trans
-NEW clutch
-New SPs w/ dist. (new points)
-Heat ducting (Powder coated and painted silver)
http://youtu.be/GYotO202EH4
You can see the progress/build in my 'Progress Thread' around page 12.
Can deliver in Socal for say $100 depending on the place (Located in Oceanside: LA to SD areas)
Includes everything you see in the pictures below....
Posted by: RiqueMar Jan 25 2011, 02:49 PM
**Bump**
Help a kid finish his GT!!!
Posted by: PeeGreen 914 Jan 25 2011, 03:17 PM
Awesome deal for this. I wish I had the spare money to buy this and help you out on getting that 6 finished 
Posted by: RiqueMar Jan 25 2011, 03:41 PM
Awesome deal for this. I wish I had the spare money to buy this and help you out on getting that 6 finished
Thanks Jon. Believe it our not, your Phoenix is my inspiration in alot of things, everything down to the sound I heard on that YouTube video.
Posted by: PeeGreen 914 Jan 25 2011, 03:46 PM
Awesome deal for this. I wish I had the spare money to buy this and help you out on getting that 6 finished
Thanks Jon. Believe it our not, your Phoenix is my inspiration in alot of things, everything down to the sound I heard on that YouTube video.
Thanks. I miss that car and am happy to hear people enjoy what I did to it. Hopefully the current owner is enjoying it as much as I did. I can't wait to see your car done. You and your dad do very nice work. Posted by: brant Jan 25 2011, 03:56 PM
bump for a great buy
I too wish the timing was different
but you'll find a buyer!
nice
brant
Posted by: MassTeener Jan 25 2011, 09:58 PM
Hey,
what cams & compression is the motor?
2.0 heads or is it a stroked 1.7/1.8?
thanks
Posted by: RiqueMar Jan 25 2011, 10:38 PM
Hey,
what cams & compression is the motor?
2.0 heads or is it a stroked 1.7/1.8?
thanks
MassTeener,
I have the receipts SOMEWHERE. I'll be looking for it tonight and tomorrow, and I'll scan and put it up. I did buy the motor from a member here, TedK. Motor was originally a 1.7.
Posted by: pooleegriff Jan 26 2011, 11:09 AM
I'm really interested too, waiting on some money that is owed to me though so I can get it. My '71 that's spewing oil would absolutely love A new engine lmao.
Posted by: RiqueMar Jan 26 2011, 01:04 PM
I can't seem to find the rebuild receipts 
In response to Massteener, I havent even broken in the engine, so I do not know what the compression is.
Posted by: RiqueMar Jan 28 2011, 11:00 AM
Spoke with my Dad to get more info on the engine, as he's the resident expert. Few more details on the motor....
+ Pistons- 96mm big bore NPRs.
+ Crankshaft- .010 under with polished journals and plasti-gauged to minimum tolerance.
+ Heads- completely rebuilt with new sodium filled exhaust valves and new guides.
+ Motor and components were dynamically balanced.
Posted by: shaqdiesel Jan 30 2011, 10:39 AM
Can u pm me ur phone number- am interested in speaking to u about this engine
Thank you in advance
RK
Spoke with my Dad to get more info on the engine, as he's the resident expert. Few more details on the motor....
+ Pistons- 96mm big bore NPRs.
+ Crankshaft- .010 under with polished journals and plasti-gauged to minimum tolerance.
+ Heads- completely rebuilt with new sodium filled exhaust valves and new guides.
+ Motor and components were dynamically balanced.
Posted by: Gint Jan 30 2011, 10:47 AM
I too wish the timing was different
but you'll find a buyer!
nice
brant
Thinking about it though it would probably cost you some time and effort to help me get it out of the car. 
Great deal on this folks. Somebody should snap it up. If I didn't already have a replacement motor I'd be drivin to SoCal.
Posted by: RiqueMar Jan 30 2011, 11:33 PM
I too wish the timing was different
but you'll find a buyer!
nice
brant
Thinking about it though it would probably cost you some time and effort to help me get it out of the car. Great deal on this folks. Somebody should snap it up. If I didn't already have a replacement motor I'd be drivin to SoCal.
Thanks Gint. I'm sure someone will see how good this deal is already.
Posted by: RiqueMar Feb 1 2011, 04:14 PM
**bump**
I think we all know what the right thing to do here is....
Posted by: Philip W. Feb 4 2011, 07:52 AM
PM sent
phil
Posted by: JmuRiz Feb 4 2011, 12:09 PM
Good deal for all that and a trans!!!
Posted by: RiqueMar Feb 10 2011, 02:01 PM
Good deal for all that and a trans!!!
Thanks for the support! Engine still for sale
Posted by: piscean914 Feb 12 2011, 06:41 PM
which cam? what's the compression/leak down? thanks, brad k
Posted by: RiqueMar Feb 13 2011, 04:50 PM
Brad,
I'm not sure what the compression is, as I've only ever tested the engine. Looking to get a leakdown tool from the Snap-On guy this week.
Engine still for sale.
Posted by: RiqueMar Feb 16 2011, 09:48 AM
Posted by: RiqueMar Feb 16 2011, 01:52 PM
Sold! 
Posted by: Philip W. Feb 17 2011, 07:00 AM
Brad,
I'm not sure what the compression is, as I've only ever tested the engine. Looking to get a leakdown tool from the Snap-On guy this week.
Engine still for sale.
I posted to ask a questions, then saw it had sold. thats great! congrats!
p.w.
Posted by: RiqueMar Feb 17 2011, 09:21 AM
I posted to ask a questions, then saw it had sold. thats great! congrats!
p.w.
Sorry Philip, but it is first come with the offers, maybe next time.
Posted by: RiqueMar Feb 17 2011, 09:34 AM
I posted to ask a questions, then saw it had sold. thats great! congrats!
p.w.
Sorry Philip, but it is first come with the offers, maybe next time.
Philip, check your inbox, I responded to your questions via PM on February 4th
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)