Posted by: DanT Apr 18 2011, 07:16 PM
late rain tray in very good condition, no cracks at attachment holes $35
water drain funnel with both ears intact $7.50
Hella side marker lights, no cracks in any of them... $10 each
aftermarket wooden pedal board...brand new.... $20
inside targa top trim that holds the rear seal in place... $10. SOLD
Monza style muffler for a 2.0L.... $50
prefer local pickup on all of the above but would consider shipping at buyers cost.
Attached image(s)
Posted by: PBC914 Apr 18 2011, 07:45 PM
QUOTE(DanT @ Apr 18 2011, 08:19 PM)
and
I'll take 2 sidemarker lights.
Posted by: euro911 Apr 18 2011, 07:45 PM
I could use the inside targa top trim that holds the rear seal in place... $10 for my 'spare' top.
How long are the longest pieces?. The Post Office sells a couple of different size mailing tubes that the pieces should fit in
Posted by: DanT Apr 18 2011, 08:54 PM
QUOTE(PBC914 @ Apr 18 2011, 06:45 PM)
QUOTE(DanT @ Apr 18 2011, 08:19 PM)
and
I'll take 2 sidemarker lights.
I will check on shipping in priority envelope tomorrow.....should be under $5 for shipping on those
Posted by: DanT Apr 18 2011, 08:55 PM
QUOTE(euro911 @ Apr 18 2011, 06:45 PM)
I could use the inside targa top trim that holds the rear seal in place... $10 for my 'spare' top.
How long are the longest pieces?. The Post Office sells a couple of different size mailing tubes that the pieces should fit in
Mark, the longest piece is 24.5"
I don't know if the post office has a priority envelope that is that long?
Posted by: euro911 Apr 18 2011, 11:04 PM
QUOTE(DanT @ Apr 18 2011, 07:55 PM)
QUOTE(euro911 @ Apr 18 2011, 06:45 PM)
I could use the inside targa top trim that holds the rear seal in place... $10 for my 'spare' top.
How long are the longest pieces?. The Post Office sells a couple of different size mailing tubes that the pieces should fit in
Mark, the longest piece is 24.5"
I don't know if the post office has a priority envelope that is that long?
No, I doubt they have an envelope that long. I used to buy their cylindrical mailing tubes for sending blueprints via 'media mail', just don't remember how long they are.
A small skinny box will do fine. I'm lucky, just about any size box is obtainable from where I work
PM me your payment info, etc. when you figure up the postage.
Posted by: DanT Apr 22 2011, 03:37 PM
Sorry to all of you, I got burried at work this week...
I will get back on this on Monday or Tuesday.
Posted by: DanT Apr 26 2011, 10:37 AM
OK here is what I found at the post office.
shipping to any US destination for the side markers would be $5.20 in a small Priority Mail box. That would be for one, two or all three.
shipping for the targa seal strips is $3.69 for the tube and then shipping which should be no more than $7.50
so let me know what each of you would like to do.
Posted by: euro911 Apr 26 2011, 02:36 PM
QUOTE(DanT @ Apr 26 2011, 09:37 AM)
OK here is what I found at the post office.
shipping to any US destination for the side markers would be $5.20 in a small Priority Mail box. That would be for one, two or all three.
shipping for the targa seal strips is $3.69 for the tube and then shipping which should be no more than $7.50
so let me know what each of you would like to do.
I had sent you a PM on Apr 22, guess you haven't opened it yet:
I stopped by the post office today, they have 24" and 36" mailing tubes available. If you can't come up with a small skinny box, the 36" tubes are $3.69
I had forgotten where you were located, so I had the clerk calculate shipping from Torrance to Oregon: she said about $6.00 if the weight was less than 3 pounds.
So, it looks like roughly $20. shipped should do it? ... (unless you're coming down to the G&R swap meet next Sunday)?
Let me know ...
Posted by: DanT Apr 26 2011, 07:55 PM
Mark,
I will get those out to you.
Just pm me your shipping details
Dan
Posted by: livewire53 Apr 26 2011, 10:08 PM
I'm interested in your muffler, I have a 74 2.0L with a wasted Bursch & a tight budget.
Was it shot when removed (real loud)?
For future reference, what did you replace it with?
Thanks
Miles
Posted by: jshooter Apr 26 2011, 10:13 PM
Is the wooden pedal board still up for grabs? If so, I'm interested. I live in Albuquerque, NM so would need it shipped. Let me know.
Thanks,
Jeff
Posted by: matteyp May 10 2011, 04:55 AM
I asked about the pedal board already, got no response so I guess it's sold or somethin..