Printable Version of Topic

Posted by: 3liter914-6 May 29 2011, 09:59 PM

Trying to clean out the garage a little bit, so I've got a few parts for sale.

15X6 Fuch (05/70) the lip is a little curbed in one spot with some scratcjes $200
https://picasaweb.google.com/3liter6/15Fuch?authkey=Gv1sRgCLK5pYLWl6f4mgE&feat=directlink

Colgan bra--just the hood portion good condition, cutout for Porsche emblem $20
914-6 Dash $100
914 Starter $25
Weltmeister 914 Rear Bar $175 All the hard parts are in good shape, bushings look OK, but may need to be replaced
912/911 hubs $150
5 14" Fuchs. I polished and painted them a few years back. Could use a little bit more polishing, but overall very good looking. Some pitting on a few of the wheels as seen in the picture $450
https://picasaweb.google.com/3liter6/914Parts02?feat=directlink

2.2T Case/Crank/Rods $400
Rest of 2.2T engine parts (heads, etc) make offer
https://picasaweb.google.com/3liter6/22TParts?authkey=Gv1sRgCIOWmqihmeHRPQ&feat=directlink

https://picasaweb.google.com/lh/photo/BDxgkxmbWd4CYHErv5sIAebKS8o8z1u4J7CxbNu4Hlg?feat=directlink $1700 Brakes worked well when removed from car, but I'd give them a checkout before hitting the track.


Prefer face to face on most of the big stuff. I travel almost every week to Athens, GA 30606 and Atlanta. So meetup is possible in ATL or along the way from 16805

Posted by: fernando Flamenco May 30 2011, 01:37 AM

Hello. I will take the dash board,let me known shipping cost to Texas 78575.
Fernando.

Posted by: porsche1vw May 30 2011, 08:44 AM

I'll take the Weltmeister Rear Sway Bar if it is 19mm diameter. Shipping to 46403. Please let me know diameter and can I pay with paypal?
Ricardo

Posted by: 3liter914-6 May 31 2011, 11:15 AM

Forgot to check, I'll do so today.

Just so everyone knows, all the parts I'm selling have photos visible by following the links associated with each grouping.

I also have some 901 gears. and could use some feedback on pricing before I list them on the bird board if you guys would minds. M S X (with dog teeth?) is $150 a set fair? Case $150? R&P worth anything?

https://picasaweb.google.com/3liter6/MGear?authkey=Gv1sRgCI6izruTo9_NsQE

https://picasaweb.google.com/3liter6/SGear?authkey=Gv1sRgCJm6gPqjqv2n_AE

https://picasaweb.google.com/3liter6/XGear?authkey=Gv1sRgCLu748et8fj6eQ

https://picasaweb.google.com/3liter6/RP?authkey=Gv1sRgCMj4pcz4m9HyXw

https://picasaweb.google.com/3liter6/901Case?authkey=Gv1sRgCIX31JbUy7DkOA

Posted by: koozy May 31 2011, 11:38 AM

You wouldn't happen to have a 1 5/8 header for a 914-6 application, would you?

Mike

Posted by: 3liter914-6 May 31 2011, 12:47 PM

I think I do, but my /6 is pretty attached to them right now. Sorry .

Posted by: 3liter914-6 May 31 2011, 06:23 PM

Just a quick note the bra. The "cutout" is actually how the bra comes from Colgan, not a DIY jobbie. I just think it's funny since 914's don't actually have one, but I guess it's a common mod...

Posted by: koozy May 31 2011, 06:23 PM

Understandable. Thanks

Posted by: 3liter914-6 Jun 1 2011, 09:53 AM

Looks like a 16mm bar.

Thanks

Posted by: sixnotfour Jun 1 2011, 10:16 AM

Adam, PP sent.
thanks jeff

Posted by: wingnut86 Jun 2 2011, 08:15 PM

...are the Fuchs still available?

I may be able to meet ya next week if I can get my truck injectors rebuilt in time.

Posted by: brant Jun 2 2011, 10:23 PM

I wish you were in colorado
I'd take the 2.2 if it was local
good luck with all of your sales

bump

Posted by: sixnotfour Jun 3 2011, 11:42 AM

Are the 2 oil lines for sale ?
how much 2.2 heads ?

Posted by: 9146BRUCE Jun 4 2011, 05:05 PM

2nd in line for the oil lines