Posted by: Rick Iverson Jun 5 2011, 10:53 AM
Fellas;
I am in need of a superb condition case to replace http://www.914world.com/bbs2/index.php?showtopic=129611&pid=1488824&st=0&#entry1488824 blunder on my behalf. The case I have reads: GA013305.
VR
Iverson
Post Scriptum - What's a GC case?
Posted by: 914LIVE Jun 5 2011, 11:30 AM
QUOTE(Rick Iverson @ Jun 5 2011, 09:53 AM)
Fellas;
I am in need of a superb condition case to replace http://www.914world.com/bbs2/index.php?showtopic=129611&pid=1488824&st=0&#entry1488824 blunder on my behalf. The case I have reads: GA013305.
VR
Iverson
Post Scriptum - What's a GC case?
-------------------------------------------------------
GA = 1973-1974 = Dome pistons = No pollution drilled heads
GC = 1975-1976 = Flat pistons = Drilled pollution heads
-------------------------------------------------------
Posted by: gcrotvik Jun 5 2011, 01:24 PM
Your case is a 74 model year case, if you don't care if it's a 73 GA case, there are two 73 cases on eBay cheap. Don't know the condition but both listings say their are usable.
Greg
QUOTE(Rick Iverson @ Jun 5 2011, 09:53 AM)
Fellas;
I am in need of a superb condition case to replace http://www.914world.com/bbs2/index.php?showtopic=129611&pid=1488824&st=0&#entry1488824 blunder on my behalf. The case I have reads: GA013305.
VR
Iverson
Post Scriptum - What's a GC case?
Posted by: Rick Iverson Jun 6 2011, 07:50 AM
Fellas;
Learning curve is approaching vertical. I purchased these some time ago:
I think they are 2.0L Mahle (European) 8:1 CR. Presumably, they fit both engines, right?
VR
Iverson
Posted by: Als914 Jun 6 2011, 09:05 AM
I have a GA case if interested.
Link shows pics of current sale.
http://www.914world.com/bbs2/index.php?showtopic=115179
Posted by: rdauenhauer Jun 6 2011, 09:26 AM
QUOTE(Rick Iverson @ Jun 6 2011, 06:50 AM)
Fellas;
Learning curve is approaching vertical. I purchased these some time ago:
I think they are 2.0L Mahle (European) 8:1 CR. Presumably, they fit both engines, right?
VR
Iverson
Both engines? Cant read the label but yes a Euro Piston set (higher compresion from Piston top profile) will fit any case when mated to a std 2.0L crank.
BTW You can use any 914 case unless your trying to match to chassis yr. for some reason. there is no functional difference. The only caveat is wear.