Printable Version of Topic

Posted by: 70-914nut Jun 25 2011, 05:42 PM

I need left and right hard line from the caliper to flex line (fronts) for a 1970 1.7 I know AA has them but maybe someone has a set they might part with.

Posted by: wingnut86 Jun 25 2011, 07:59 PM

I'll look at my roller tomorrow if it's not mudville out back of the house.

I know the calipers were missing on the front, so I'm not sure what else was pulled.

Send me a picture of your need as well in case ole'timers crosses me up.

Posted by: 70-914nut Jun 26 2011, 08:07 AM

Here is a pic of my calipers i recieved from Eric Shea at pmb performance, he does great work. My rear are being done as we speak. The hard line is attatched to the caliper and goes to a mount that connects to the flexible line. I dont have a pic showing the complete setup except in my haynes manual. I dont know if they are diferent by years either. Mine is a 1970
Thanks Barry

Posted by: rdauenhauer Jun 26 2011, 09:32 AM

Those look to be late calipers not early.
The diff is attachment point of the hard line to the caliper
Early used a banjo bolt thru a brass fitting to which the hard lint attached
Late was just the hard line which went directly to the caliper.

Ill post a pic or two

Posted by: 70-914nut Jun 26 2011, 11:48 AM

will they work on my 1970?

Posted by: 70-914nut Jun 26 2011, 11:51 AM

I just need to put my brakes on and i dont have the lines or hardware, and i dont want to order the wrong stuff. help me out guys with what i need to get them working. Thanks

Posted by: rdauenhauer Jun 26 2011, 02:52 PM

Early vs late hard lines (FS BTW )