So here's a quick parts list to see if anyone has some of this stuff
Plastic seat belt covers
Plastic head light motor covers
Lug set, chrome preferably
Small seal drivers door, goes in the track inside the door
Passenger side inner door seal
Descent to nice door sill plates and carpet rails
Plastic gas pedal stop on foot board
Ecu bracket
Plastic relay board cover with screw
Plastic Fog light grills
Thanks for the help will think of more later
Also need a good rear top rubber piece if someone has one. Thanks
Matt
p.m. sent on the headlight motor covers
Mike
Hey Matt, got some "decent" door and carpet sills, one set in black plastic (late) and one set in aluminum, your choice. Also have a relay board cover that was repaired with aluminum discs bonded to the bolt hole where they usually crack. Sills and cover at your door for $60.
Tom
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)