I need the following two crush washers post haste!
N-013-845-2
N-013-829-3
These are the crush washers for both pressure relief pistons on a '74 case. I'll check with Porsche in the morning, but if someone has them and wants to drop them in the mail I'd gladly buy them from you!
Thanks.
-Aaron
bel metrics... ??
https://www.belmetric.com/drain-plugs-and-gaskets-hollow-copper-crush-c-11_94.html?zenid=bijtf4q4epatt6m7245vsvq4j3
Looks like they have one, but not the other. They are listed as:
Oil pressure relief valve crush washer - N 013 829 3 - aluminum, 22mm
Oil pressure control valve crush washer - N 013 845 2 - copper, 16mm
try high performance house @ 650-364-6234.
I found a 12mm crush washer for my tuna can at Napa Auto parts last saturday (HPH was closed); they may have the larger ones also.
I just ended up ordering them from Pelican Parts. Thanks.
Turns out Pelican can't get the crush washer for the relief valve below the push rod tubes:
N-013-845-2
Bump again in case anyone has one floating around. I left a message at HPH too.
-Aaron
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)