Printable Version of Topic

Posted by: avidfanjpl Aug 4 2011, 01:46 AM

I have the new gaskets. Just need an oem nice oil cooler for my 2.2T mounted in my AX 914-6 do not need it modded but may also consider the hose that Attaches to the oil cooler pipe

Images appreciated, paypal enabled!

Thanks!

John
Avidfanjpl

Posted by: RiqueMar Aug 4 2011, 08:53 AM

QUOTE(avidfanjpl @ Aug 4 2011, 12:46 AM)

Posted by: avidfanjpl Aug 4 2011, 12:48 PM

I just need to figure out where it is leaking, then see if it is repairable, Rique.

I have not looked at it closely, but it looks like 4 bolts hold it on, and that the hose attaches to the pipe, but no practical knowledge yet.

Stand by on the modded unit, I may or may not need it.

Rotating the hose 90 degrees is not something I am at all familiar with yet.

Thanks!

John

QUOTE(RiqueMar @ Aug 4 2011, 07:53 AM)

QUOTE(avidfanjpl @ Aug 4 2011, 12:46 AM)

I have the new gaskets. Just need an oem nice oil cooler for my 2.2T mounted in my AX 914-6 do not need it modded but may also consider the hose that Attaches to the oil cooler pipe

Images appreciated, paypal enabled!

Thanks!

John
Avidfanjpl

When you say 'do not need the modded, do you mean that you need one without the 90 degree bend? If so, I have one off of my 2.7 'S'

Posted by: RiqueMar Aug 4 2011, 01:22 PM

John, sounds good, and let me know if there is anything I can do to help as I'm just 'right down the 5'.

If you decide you need it, maybe we could make that an excuse to meet up at Cars and Coffee!