Printable Version of Topic

Posted by: epignosix Sep 17 2011, 12:09 PM

I have a few parts I figured I'd just put up in one big post with pictures...
All shipping costs are for 48 lower states.






Brand new yellow signal covers. Never unwrapped and I didn't want to just for the picture. $40 shipped SOLD


Engine control module $45 shipped



front signals both shipped for $22.00 w/o covers SOLD


both front headlights/just the bulbs
$25 shipped for both.
(Also have headlight motors available if someone needs them)



Front drivers side fog light how you see it is how it is. SOLD



Steering wheel $25 shipped SOLD



shifter assembly in the car. $45shipped SOLD


Front Calipers $30 +shipping


rear calipers $30 + shipping


interior light $10 shipped SOLD


trunk push button lock $10 shipped [/b]SOLD


cig lighter $10 shipped [b]SOLD


side markers....$10 shipped for both only selling the pair One has a slight crack, I'll sell you the lenses plus the actual lights... buy them this weekend or I'm putting them in the trash on TUESDAY Sept 27th. SOLD/FREEBIES


jack triangle pieces selling both for $50 shipped SOLD


Door handles $30 shipped for both. STILL AVAILABLE


Signal Stalk $40 shipped Make me an offer.... SOLD


End pieces for rear engine cover grill both $30 shipped Make me an offer


I can't remember where these came from exactly somewhere in heat exchanger/exhaust system... if you need them you will know what they are.
$40 shipped SOLD

And that is about it I think.... I may be open to offers on some things. I really just need these gone. Need to make way for new projects!

Posted by: porsche913b_sp Sep 17 2011, 12:31 PM

I will take steering wheel. Let me know payment info

Posted by: cpfoster Sep 17 2011, 01:30 PM

PM sent shifter, marker lights

Posted by: wingnut86 Sep 17 2011, 06:31 PM

I'll take the following:

Heat exchanger parts/components
Interior light
Sheetmetal repair dog-nuts
Side lights/exterior

PM sent...

Posted by: bdstone914 Sep 17 2011, 06:53 PM

PM sent for trunk button and cig lighter

Bruce

Posted by: Spoke Sep 17 2011, 07:12 PM

I'll take the following:

Front turn signal lenses.
Front turn signal light buckets.

PM Sent.

Posted by: epignosix Sep 17 2011, 08:12 PM

Q1: sheetmetal parts your referring to, do you mean the triangular ones I have listed...


Q2: Side marker lights. do you want just the lenses or the light units as well. After further inspection on side marker lenses one is cracked the other is fine with no cracks.

paypal info is ntechmotorsports@gmail.com

Posted by: epignosix Sep 17 2011, 08:22 PM

Just wanted to make sure you could tell the steering wheel has once of those steering wheel covers over it.

Posted by: epignosix Sep 17 2011, 08:35 PM

You have first dibs on the shifter and side marker lights.

One of the lenses on the side markers light is cracked but the other is ok. If you want them let me know. Otherwise it's just $45 for the shifter shipped if you want the markers it's $55.00. Let me know on the markers though because wingnut wants them too I believe.

Once you have sent payment to ntechmotorsports@gmail.com on paypal please PM me with your address and phone for shipping purposes. Please include the part you purchased in the same PM so I can keep everything straight. Thanks.

Posted by: wingnut86 Sep 17 2011, 09:56 PM

yes, the triangular doughnut hole pieces.

And, the circular side marker lenses.

Posted by: budk Sep 18 2011, 05:58 AM

I'm interested in the single fog light.

Let me know the price shipped to 15057.

thanks.

Posted by: epignosix Sep 18 2011, 07:15 AM

It's come to my attention that I am a "lurker" so here is a little about how I can across this 914 and it's parts.

My dad bought the 914 at the Kruse auburn auction about 3 years ago. We bought it without looking it over first. Dumb. The car ran but the more I got into it the more rusted it was. I was trying to restore it but the frame was sagging, it needed a whole new floor pan, and the doors wouldn't shut right. I told my dad I think its too far gone and we should just try and part it out and get as much money back that way as we can. Last summer I stripped all I could off and we took it for scrap. I have these parts left and I want to clear my garage out so I can start a new project. The car I really like is a vw corrado vr6. I've restored one and owned 3. I am also on the corrado club of canada forums as epignosix, and I'm on vwvortex as "stolemycorrado" I'll get a picture of the car at the scrap yard later today. I like corrados, which in some respect is a very specialty vehicle like the 914. So I'm familiar with parting them out, as many corrados are parted and I have done that as well.

Greg

The current state of the shell..... omni source got it... it's probably part of hot rolled steel from steel dynamics now....

Posted by: epignosix Sep 18 2011, 09:43 AM

Other parts I have, which I didn't get in the orginal post are: A plastic dash cover, headlight motors. One plastic cover to the headlight. And two disc brake dust/splash shields. Just found a window regulator hand cranks style, im not sure which side it is I think passenger. I will get a picture up and let everyone else decide which side it is.

And this is the corrado I restored... it's a g60 but it was pretty sweet!

Posted by: Firstcar Sep 19 2011, 09:00 PM

Interested in fog light parts if not sold to budk. PM sent
-Scott

Posted by: epignosix Sep 20 2011, 11:13 AM

Budk has current dibs on the fog light and dash cover. When I have received payment the items will be listed on the thread as SOLD.

Posted by: mgphoto Sep 20 2011, 11:29 AM

you should list the chassis serial number in the database as dead.

Posted by: epignosix Sep 20 2011, 12:04 PM

I just found a window regulator as well. I'm not sure what side its from. I think passenger. I'll get a pic up soon and let you decide what side it is from. I sold the other side for like $70+ shipping, but I just want it gone so so the price is $57 shipped

Posted by: epignosix Sep 20 2011, 12:06 PM

I will in a few days once I get people's parts shipped out! Which I plan on having all people who have paid shipped tonight. If you want something left pay me and I'll ship it tonight.

Posted by: epignosix Sep 20 2011, 02:33 PM

So no one needs to rebuild their calipers? Are these too expensive? Someone make me an offer on the calipers I don't want to keep em!

Posted by: wingnut86 Sep 20 2011, 03:12 PM

Early, single bleeder brakes go for less...

Dual bleeders, off the later models go for $18 to $45 in this shape. Higher if recently rebuilt and tested.

Others here may agree/disagree.

Eric Shea "Caliper Master", Cap'n Krusty, RacerChris - Bueller?

Posted by: jimkelly Sep 21 2011, 12:32 PM

are cars gone?

do you have any of these in excellent shape?

jim


Attached image(s)

Posted by: Spoke Sep 22 2011, 08:42 PM

Got the front lenses and buckets today. Thanks! Good stuff!

Posted by: epignosix Sep 23 2011, 12:04 PM

OK calipers... I'm tired of seeing them... $30 front, $30 for the rear + shipping.. they are heavy so I'm not gonna get hosed on shipping .

Posted by: epignosix Sep 23 2011, 12:06 PM

Nope, sorry. I might have had one good one, but I think I didn't think it was worth keeping. Sorry. I know one of mine was rusted out bad.

Posted by: epignosix Oct 4 2011, 06:55 PM

Is everyone getting their stuff ok? Let me know if you got it! I like to keep happy customers!

Posted by: epignosix Oct 6 2011, 11:36 AM

All parts that have been paid for have been shipped!