Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Godfather Sale - make me an offer I can't refuse

Posted by: Cheapsnake Sep 18 2011, 06:02 PM

After 3 years and 5 parts cars, I'm finally finished with my project and the leftovers are taking up valuable space in my shop. It's gotta go either to someone who can put the stuff to good use or, heaven forbid, to the landfill. All the big stuff, engine tranny, wheels, etc. are gone so what's left is the bits and pieces.

Rather than try to describe all of it and its condition, I'm posting pictures of the stuff just to give an idea of the range of items. If you're interested in anything let me know and I'll give you a better (and honest) assessment of the item. I won't sell anything that isn't certified as working. If you need pictures of individual items I can do them, but please don't ask for pictures unless you're really interested and there's a question about condition.

Rules say I have to put a price on this stuff, so I'm putting prices on it that I think are fair, but if you think of a "fairer" price, make me an offer I can't refuse. Tell me what it's worth to you (shipping included) and there's a good chance I'll take it. I like USPS Flat Rate shipping so if it fits in any of their Flat Rate boxes ($5 small, $11 medium, $15 large), factor that into your offer.

If you have any questions on this stuff or want to make an offer, PLEASE do me a big favor and send an email to ffr2776@sbcglobal.net. It makes sending pics easier, gets you a faster response and keeps this board from getting bogged down. If you do have to reply on this post, please avoid reposting all the pics. Thank you.

Remember, all prices include shipping (CONUS only). Put a bunch of stuff together and MAKE OFFER, save shipping.

Attached Image
Headlight motors and linkage - $30
Headlight rotating assemblies, with light - $30
Headlight covers - $25/ set
Headlight surrounds (plastic) - $15
Headlight eyebrows - $25/set
Headlight linkage covers - $15 each
Wiper assemblies - $40
Side marker lights w/lenses - $15
Turn signal lenses (7/10) - $8
Turn signal bucket - $18
Fog light grill (solid, but finish is crap) - $20
Sail Panel trim, 3 pieces, all have dings and scratches - $12 each
Headlight switches - $35
Hazard Switches - $30
Foglight switches - $25
Cigarette lighters, socket and lighter - $10
Fasten Seat Belt lights - $8
Glove box latch - $8
engine compartment lights - $8
Brake light switch - $25
Round relays $5
Trunk pushbutton - $10
Defrost Switch - $8
Defrost lever, some pitting - $20
Defrost lever, missing knob - $10
License Plate bracket - $15

Attached Image
DS door pockets, tops are good, bottoms not so much - $35
PS armrests - $25
PS armrest w/o bottom - $15
A-pillar interior trim piece - $20/pair
Targa interior trim piece - $20/pair
Pedal board - $25
Door jamb vent filters - $6 each
Ashtrays - $12
Early center console tray - $15
Seat belt receivers - $20/pair

Attached Image
Backpads, need work - $80
PS early basketweave door panel, VGC - $70

Attached Image
Seats, all have tears or ripped seams - $10,000 OBOVinyl has been stripped, shells and foam is still available. Make offer.

Attached Image
Aluminum door threshold and carpet strip (one side) - $20
Black plastic door threshold and carpet strips, both sides - $35/set
Late regulators, DS - $30
Front and rear trunk latches - $10 each
Quarter window glass and frame - $30
Misc. window/door hardware - anything for $10, take it all for $20

Attached Image
Seat slidershttp://www.914world.com/bbs2/style_images/L96B/folder_rte_images/strike.gif, w/unbroken handle - $35, broken handle $30
Side windows, some early, some late, some tinted, some not - $40 each
Rear glass, unheated - $50

Attached Image
Steering racks, no slop - $65
Steering shafts - $30
Front and rear trunk hinges - $15
Gas tank, solid - $85
Tank filler hardware - $15
Tank bumpers - $18/set
Tank strap & hardware - $10
Gas caps - $12
WS Washer bottles - $20
WS washer pump - $20
Fuel level sender, tested good - $45
Charcoal canisters - $20

Attached Image
Fresh air blower, no top, works - $45
Defrost blowers, works - $35
Front vent valves - $25
Defrost vent ducts - $18 each, both for $25
Lower dash air deflectors - $12 each, $18/set
Drain tubes, crack-free - $12 each
Lower dash with air deflectors, crack-free - $65
Rear targa latch pad, vertical crack at center screw hole - $55
Windshield upper trim piece, VGC - $ 40

Attached Image
Rain tray, small crack in bottom sealed with Plasti-Dip, otherwise solid - $60
Upper targa chrome trim VGC - $40
Top targa trim piece, the little one on the end - $6
Lower WS chrome trim - $30
Misc. weatherseal - any piece $10
Targa latch stowage cups, VGC - $10 each, $15 for the set
Shock tower rubber covers, no cracks - $15/pair
Brake proportioning valve - $25
Bumper dogbones and bumper mounting pads - $15 for all
Radio dash mounting plate, no vinyl - $6
Brake fluid reservoirs with caps - $15 each
Interior door handles - $12 each, all for $25
Interior door handle escutcheons - $3 each
Window cranks, chrome and black plastic - $5 each
Rear targa latches - $12 each

Attached Image
Clutch pulleys - $15
Transmission mount hardware - $15
Lug bolts, various lengths, $1 each + $5 shipping for any quantity
Front shock mount hardware - all for $15
Starters, Autozone tested good - $25
Tailshift shifter - $20
Engine mount bar - $35
Fuse panels - $25
Distributor, p/n 039 905 205 ?A, cap and wires, new set of points - $75
Distributor caps and wires - $15
Taco plates - $8
Oil screen - $8
Oil fillers - $15
Oil cooler - $35
Relay Board - $35

Attached Image
PS front fender, surface rust, but solid and unbent - $95
Horn ring - $20
Three steering column assemblies, in various stages of assembly, all late model - email for descriptions.
Turn signal switch, not sure which year it's from, p/n 914 613 901 10, no broken parts - $25

Horn, works - $25
Gauge panel, speedo works but tach needle broken off, fuel level gauge untested - $75
Odometer reset cable - $12 or buy the gauge cluster and I'll throw it in
Head temp sensor - $6
Dipsticks - $10
Front hood latch and cable $15
8-track cassette player (no, really) - $6

Attached Image
Clutch assembly, off a 1.8 I think - $60
Alternators, untested and sold as cores - $20

Again, all prices include shipping, which makes some of them seem a bit inflated. Your best bet is to come up with a package of items that can ship together and you'll save a ton on shipping. Put a package together and make me an offer.

Posted by: Harpo Sep 18 2011, 06:14 PM

Do you have an old/origional working radio?

Thanks

David

Posted by: 76-914 Sep 18 2011, 06:56 PM

Ill give 35 for the outer door handles

Posted by: 70_914 Sep 18 2011, 07:40 PM

I need the chrome and black window crank. I also need a heater lever for a car with a console. $20 shipped?

Posted by: ppetion Sep 18 2011, 08:04 PM

I need the piece that goes under trhe targa bar as shown on the picture and the rain tray.. pm me a price shipped to 11580


Attached image(s)
Attached Image

Posted by: db9146 Sep 18 2011, 08:45 PM

Do you have the front latches from a roof?

Posted by: kconway Sep 18 2011, 08:47 PM

I'm interested in the bolster shown next to the targa bar pad that the visors attach to. I can't tell if the one you have shown has cracks or splits, if not it's worth $40 sipped to me.

Kev

Posted by: Cheapsnake Sep 19 2011, 11:19 AM

QUOTE(Harpo @ Sep 18 2011, 04:14 PM) *

Do you have an old/origional working radio?

Thanks

David


Nope, but I do have an 8-track cassette player in one of the pics. I'll even throw in a couple Partridge Family tapes. biggrin.gif

Posted by: Cheapsnake Sep 19 2011, 11:21 AM

QUOTE(76-914 @ Sep 18 2011, 04:56 PM) *

Ill give 35 for the outer door handles

sorry, gone.

Tom

Posted by: A&PGirl Sep 19 2011, 12:04 PM

PM'd for the fender, steering column switches, and steering linkage.

Posted by: Cheapsnake Sep 19 2011, 12:21 PM

oops, sorry, double post

Posted by: pilothyer Sep 19 2011, 04:06 PM

Hello Tom....I am interested in getting a charcoal cannister along with the bracket that attaches it to the fufel tank....I really just need the bracket but will take the whole thing if I have to.This would be for a 74 and looks like the same tank that is in your picture....The cannister looks like the bottom right one in your picture.......Jerry

Posted by: Cheapsnake Sep 19 2011, 04:49 PM

QUOTE(db9146 @ Sep 18 2011, 06:45 PM) *

Do you have the front latches from a roof?

no, sorry.

Posted by: Cheapsnake Sep 19 2011, 04:52 PM

QUOTE(70_914 @ Sep 18 2011, 05:40 PM) *

I need the chrome and black window crank. I also need a heater lever for a car with a console. $20 shipped?


You got em. PM sent.

Posted by: tod914 Sep 19 2011, 05:06 PM

Looking for a mint passanger arm rest/handle. If you have one, please let me know. Thanks, Tod

Posted by: Cheapsnake Sep 19 2011, 06:40 PM

QUOTE(tod914 @ Sep 19 2011, 03:06 PM) *

Looking for a mint passanger arm rest/handle. If you have one, please let me know. Thanks, Tod

I've got several, one without the bottom, $15 and two with bottoms, $25, all in good condition and include shipping.

Tom

Posted by: Eric_Shea Sep 19 2011, 07:34 PM

pray.gif

Thanks Tom! I know that was a buttload of work. Sorry.

beerchug.gif

Posted by: Firstcar Sep 19 2011, 08:38 PM

Tom,
Interested in the distributer, PM sent
-Scott

Posted by: kconway Sep 19 2011, 11:08 PM

QUOTE(kconway @ Sep 18 2011, 07:47 PM) *

I'm interested in the bolster shown next to the targa bar pad that the visors attach to. I can't tell if the one you have shown has cracks or splits, if not it's worth $40 sipped to me.

Kev


? confused24.gif

Posted by: OU8AVW Sep 20 2011, 03:28 AM

First off, this is an exceptional posting and should be an example of how to sell bulk parts on the World. Nice work.....
Second, I'll take the following.
A-pillar interior trim piece - $20/pair
Targa interior trim piece - $20/pair
Side marker lights w/lenses - $15
Shipped to 21403
I can't remember, you a paypal guy?
I'll send an e-mail later.
Thanks mucho!

Mike-

Posted by: Cheapsnake Sep 20 2011, 10:42 AM

QUOTE(Eric_Shea @ Sep 19 2011, 05:34 PM) *

pray.gif

Thanks Tom! I know that was a buttload of work. Sorry.

beerchug.gif

Thank you for keeping us troublemakers in line Eric. beerchug.gif

Posted by: Cheapsnake Sep 20 2011, 10:44 AM

QUOTE(kconway @ Sep 19 2011, 09:08 PM) *

QUOTE(kconway @ Sep 18 2011, 07:47 PM) *

I'm interested in the bolster shown next to the targa bar pad that the visors attach to. I can't tell if the one you have shown has cracks or splits, if not it's worth $40 sipped to me.

Kev


? confused24.gif

sorry for the delay, I'm swamped. PM sent.

Posted by: Cheapsnake Sep 20 2011, 11:05 AM

QUOTE(OU8AVW @ Sep 20 2011, 01:28 AM) *

First off, this is an exceptional posting and should be an example of how to sell bulk parts on the World. Nice work.....

Mike-


Thank you and thank Eric too for holding me to the cardinal rule of the board, ie; prices on everything. The only regret I have is that I greatly underanticipated the response to my post and I'm scrambling to keep up.

Anyway, I've got everything you need and I watch for your email. Thjanks.

Tom

Posted by: cpfoster Sep 22 2011, 08:26 AM

PM sent taco plates, turn signal lenses

Posted by: porsche913b_sp Sep 22 2011, 12:34 PM

Did I miss the price for the rear trailing arm shims ?


Posted by: Cheapsnake Sep 22 2011, 12:38 PM

QUOTE(porsche913b_sp @ Sep 22 2011, 10:34 AM) *

Did I miss the price for the rear trailing arm shims ?


sorry, they went right away at around $2 per.

Tom

Posted by: Cheapsnake Sep 22 2011, 12:48 PM

Just found these:

Engine harness, either from a 73 2.0 or a 74 1.8, can't remember which. Cut at the bulkhead but everything in the engine room is there. $60 shipped obo.

Two targa tops, both are good cosmetically, one has bad side window seals. $80 & $100 shipped.

License plate bracket, pretty much rust free and straight. $20 shipped.

Got screwed up and previously listed the drain tubes and shock tower rubbers as sold. They're still available. I'll try to recontact those that showed interest.

Tom

Posted by: Cheapsnake Oct 4 2011, 06:43 PM

Plenty of good stuff remaining. Look it over and make me an offer. You know you want it.

Posted by: Bob L. Oct 4 2011, 07:27 PM

Hi, Do you have an engine lid release cable with pull knob and trim?
Also, I need all of the targa seals. It looks like there might be some in that pile. ?.
Prices?
Thanks,
Bob

Posted by: SUNAB914 Oct 5 2011, 11:33 AM

Windshield upper trim piece, VGC - $ 40
If still available? $40.00 shipped?


Posted by: Cheapsnake Oct 5 2011, 06:51 PM

QUOTE(Bob L. @ Oct 4 2011, 08:27 PM) *

Hi, Do you have an engine lid release cable with pull knob and trim?
Also, I need all of the targa seals. It looks like there might be some in that pile. ?.
Prices?
Thanks,
Bob

No engine lid release. Unless you're an originality nut, I'd pick up a universal choke cable kit, the the sheath away and use the cable and knob. The knob will be a bit off but it'll work. Targa seals, I'll check tomorrow and let you know what I've got.

QUOTE(SUNAB914 @ Oct 5 2011, 12:33 PM) *

Windshield upper trim piece, VGC - $ 40
If still available? $40.00 shipped?

Still available. PM sent.

Tom

Posted by: Bob L. Oct 6 2011, 04:03 PM

QUOTE(Cheapsnake @ Oct 5 2011, 07:51 PM) *

QUOTE(Bob L. @ Oct 4 2011, 08:27 PM) *

Hi, Do you have an engine lid release cable with pull knob and trim?
Also, I need all of the targa seals. It looks like there might be some in that pile. ?.
Prices?
Thanks,
Bob

No engine lid release. Unless you're an originality nut, I'd pick up a universal choke cable kit, the the sheath away and use the cable and knob. The knob will be a bit off but it'll work. Targa seals, I'll check tomorrow and let you know what I've got.

QUOTE(SUNAB914 @ Oct 5 2011, 12:33 PM) *

Windshield upper trim piece, VGC - $ 40
If still available? $40.00 shipped?

Still available. PM sent.

Tom

Sent Payment and shipping address in PM. Thanks again.

What other weatherstripping pieces are in the pile.? I need lots.

Posted by: HolyMoses Oct 6 2011, 05:16 PM

Thanks Tom. PM and check sent.

Posted by: Bob L. Oct 19 2011, 01:41 PM

QUOTE(Cheapsnake @ Oct 5 2011, 07:51 PM) *

QUOTE(Bob L. @ Oct 4 2011, 08:27 PM) *

Hi, Do you have an engine lid release cable with pull knob and trim?
Also, I need all of the targa seals. It looks like there might be some in that pile. ?.
Prices?
Thanks,
Bob

No engine lid release. Unless you're an originality nut, I'd pick up a universal choke cable kit, the the sheath away and use the cable and knob. The knob will be a bit off but it'll work. Targa seals, I'll check tomorrow and let you know what I've got.

QUOTE(SUNAB914 @ Oct 5 2011, 12:33 PM) *

Windshield upper trim piece, VGC - $ 40
If still available? $40.00 shipped?

Still available. PM sent.

Tom



Got the parts.
Thanks Tom.
Bob.

Posted by: kid914 Oct 19 2011, 04:43 PM

QUOTE(Bob L. @ Oct 19 2011, 03:41 PM) *

QUOTE(Cheapsnake @ Oct 5 2011, 07:51 PM) *

QUOTE(Bob L. @ Oct 4 2011, 08:27 PM) *

Hi, Do you have an engine lid release cable with pull knob and trim?
Also, I need all of the targa seals. It looks like there might be some in that pile. ?.
Prices?
Thanks,
Bob

No engine lid release. Unless you're an originality nut, I'd pick up a universal choke cable kit, the the sheath away and use the cable and knob. The knob will be a bit off but it'll work. Targa seals, I'll check tomorrow and let you know what I've got.

QUOTE(SUNAB914 @ Oct 5 2011, 12:33 PM) *

Windshield upper trim piece, VGC - $ 40
If still available? $40.00 shipped?

Still available. PM sent.

Tom



Got the parts.
Thanks Tom.
Bob.

Hi tom i would be interested in a driver side seat slide assembly, and possibly a rear window.
Can you pm me with a price to Canada k0a2m0
Thankx

Posted by: HolyMoses Oct 19 2011, 05:44 PM

Tom,

Thanks! All parts received, well packed, so I can go back to work on old Rusty. Thanks for that extra "license plate" light. biggrin.gif

Posted by: Cheapsnake Oct 20 2011, 12:32 PM

QUOTE(HolyMoses @ Oct 19 2011, 06:44 PM) *

Tom,

Thanks! All parts received, well packed, so I can go back to work on old Rusty. Thanks for that extra "license plate" light. biggrin.gif


You're welcome Holy...someday, you too may do the Godfather a favor. beerchug.gif

Tom

Posted by: Cheapsnake Oct 29 2011, 06:44 AM

Shameless bump. Plenty of good parts left and I've got to get rid of them to make room for the next project. Make an offer, the Godfather will likely look kindly upon it.

Posted by: reharvey Oct 29 2011, 08:45 AM

I see you have two gas tank vapor expansion tanks. I need one thats not dented on the top. Your's look pretty good. I also need the left washer for the pedal board. How much with shipping to 44437? Ray

Posted by: Cheapsnake Oct 29 2011, 05:56 PM

QUOTE(reharvey @ Oct 29 2011, 09:45 AM) *

I see you have two gas tank vapor expansion tanks. I need one thats not dented on the top. Your's look pretty good. I also need the left washer for the pedal board. How much with shipping to 44437? Ray


pm sent.

Posted by: ScottD914 Oct 31 2011, 07:28 AM

Tom, $10 on the way for the cigarette lighter/ socket.

As I was writing down your address, I remembered you sold me a sweet piece of windshield trim about a year ago!

Quick ship and arrived as expected. Thanks!

ScottD

Free: icon_bump.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)