Posted by: orange914 Sep 30 2011, 09:47 PM
SOLD
96mm flat top piston set w/ wrist pins
To help you know exactly what you’re paying, 99% of the items I will cover shipping cost. These are from my years of personal stash for my 73.
* if you'd like to pay with pay pal please add 4.4%.
* Please ad reply w/ the items committed as a courtesy to let others know they are taken My paypal isebayerrr@yahoo.com
1.7 euro piston set
http://www.914world.com/bbs2/index.php?act=ST&f=18&t=146019&st=0#entry1546389
1.7 rod set
http://www.914world.com/bbs2/index.php?showtopic=146020
Wiper & hazard switches
http://www.914world.com/bbs2/index.php?act=ST&f=18&t=146022&st=0#entry1546405
fuel sending unit w/ hardware
http://www.914world.com/bbs2/index.php?act=ST&f=18&t=146237&st=0#entry1547361
rain funnel
http://www.914world.com/bbs2/index.php?act=ST&f=18&t=146238&st=0#entry1547363
flat top pistons
http://www.914world.com/bbs2/index.php?showtopic=146239
rear window,* side widow & wing glass
http://www.914world.com/bbs2/index.php?showtopic=146342
beauty ring
http://www.914world.com/bbs2/index.php?showtopic=146343
O.E.M. starter
http://www.914world.com/bbs2/index.php?showtopic=146344
Posted by: OU8AVW Oct 1 2011, 10:24 AM
They won't fit my application.
Please delete...
Thanks
Posted by: orange914 Oct 3 2011, 09:26 PM
QUOTE(914rat @ Oct 2 2011, 07:58 PM)
What brand are they?
Got more info. for you:
*all weighed within 1.5 grams (you could mix and match pins & retainers and get closer)... great balance out of the box BTW
*after looking closely, these must
not have been used much more than a few hours in my opinion. I had bought them used around the date on the box, so???
*the box has a KB in the number. Not sure of brand
*# inside skirt #29108.2
* rings look new, but chances are had been on for the same run time
* date 08/07
*original price $265 (+taxz+ship)
*fun fact... give away @ $95 shipped
Posted by: pilothyer Oct 3 2011, 10:17 PM
Since you have a dial caliper on hand , would you please measure the pin diameter...........The box lable seems to indicate a 22 mm pin.
Posted by: orange914 Oct 3 2011, 10:32 PM
QUOTE(pilothyer @ Oct 3 2011, 09:17 PM)
Since you have a dial caliper on hand , would you please measure the pin diameter...........The box lable seems to indicate a 22 mm pin.
crap!... just put it all back in the great abiss. Your right, however if that does mean a 22mm pin I need to find that out before selling
Posted by: pilothyer Oct 3 2011, 10:32 PM
Disregard previous post......According to the lable on the box, these are in fact Keith Black Stroker Pistons 96mm with a 22 pin and used for 78 to 80 stroke.......still a good buy but only for that application. Current price on this set is $300.00
Posted by: orange914 Oct 3 2011, 11:02 PM
QUOTE(pilothyer @ Oct 3 2011, 09:32 PM)
Disregard previous post......According to the lable on the box, these are in fact Keith Black Stroker Pistons 96mm with a 22 pin and used for 78 to 80 stroke.......still a good buy but only for that application. Current price on this set is $300.00
holy crap, the hair on my back of my neck just went up. I had bought those to use on my 2056 but decided to use dished for F.I. comp. Great pistons wrong application
I appreciate the good input, pilothyer. I will still honer the price to any of you previous responsers (OU8AVW, 914rat,pilothyer)
before this post, otherwise I will repost and this will be a dead thread.
Posted by: orange914 Oct 3 2011, 11:14 PM
Thinking this over it is possible the box was reused to send me these pistons. I will check the pin and see... 22mm or 24mm
Posted by: orange914 Oct 5 2011, 02:49 PM
QUOTE(orange914 @ Oct 3 2011, 10:14 PM)
Thinking this over it is possible the box was reused to send me these pistons. I will check the pin and see... 22mm or 24mm
QUOTE
pin height looks too tall to be stroker pistons. with stroker pistons, teh oil ring gets close or over lapps the wrist pin
Thanks, Sean, the pins are 24mm so along with your info. I'm relitively certain these where just boxed in this package for shipping to me and are infact 2056 pistons or 96mm for 71mm stroke.
Mike