Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: 2.0 GA engine with sheetmetal
Posted by: 914ltd Oct 6 2011, 08:20 PM
I have a 2.0 engine from a parts car that had set many years. I temporarily installed a carb and started it. It sounded good but one cylinder only came up with 90psi compression. The compression may come up with use since it had set so long There was also water in the crankcase which I flushed out with 2 oil changes. No intake or exhaust. I'll replace the fan. $350. Pick up price.
Add $50. if I need to pallet and transport to a trucking firm. Brad
Attached thumbnail(s)
Posted by: 914ltd Oct 18 2011, 08:47 AM
Price drop
Posted by: 76-914 Oct 18 2011, 04:54 PM
Damn that's a good deal, Brad. Someone should jump on this.
Posted by: ppetion Oct 18 2011, 05:24 PM
pm sent!
Posted by: 70_914 Oct 19 2011, 02:17 PM
Damn that's a good deal, Brad. Someone should jump on this.
Worth it for the heads and cylinder head tin....
Posted by: rpmmaxxed Oct 21 2011, 10:08 PM
How much to ship to 92054?
Posted by: rgalla9146 Oct 22 2011, 11:25 AM
pm sent!
Hi Paul
If the engine in Indiana doesn't come through I've got a GA here in NJ. It has tin as well but has not been cut for AC and is not rusty.
Has lower compression in one cylinder but I also feel that that can come back after running for a while.
Also, it has not been flooded with water.
$650.
Rory 201 291 7994
Posted by: ppetion Oct 22 2011, 04:30 PM
pm sent!
Hi Paul
If the engine in Indiana doesn't come through I've got a GA here in NJ. It has tin as well but has not been cut for AC and is not rusty.
Has lower compression in one cylinder but I also feel that that can come back after running for a while.
Also, it has not been flooded with water.
$650.
Rory 201 291 7994
I picked up one from Jimkelly in Delaware earlier this week. Thanks for the offer.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)