Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS Sawsall-Party Taking requests

Posted by: bdstone914 Oct 10 2011, 07:54 AM

Taking requests for cut out body parts

I am cutting up a 1974 914. The complete front trunk pan is going to one member and the whole center section that includes the targa bar, firewall and floor is also spoken for.

I need to cut up and get this car gone in the next two weeks.

I does have some rust in the pass long in the front and rear trunk floor rust.

Most of the rest of the car is in good shape. I want to make the best use of the body to see it go to other 914 restorations. I want to maximize the use of the car and may not accept the first offer it if makes another part useless.

The front pass fender is crunched in the back area by the door.. Other three fenders are in good shape. Some bondo around the sail panels as a result of body work.

Tell me what you need or take a picture of that area and I will see what I can do to get that part. I can also take a picture of the area you may need and mark cut lines.

Some parts I know are good are:

E brake handle mount $35
Cross member $75
Front drivers fender $125
Rear fenders $175 each
Rear trunk panel that hold the tail lights $75
Cowl panel $100.
Suspension consoles $75
Engine mount consoles $75
I also have some good forward long sections cut out from other cars.

Name your part and will see if we can agree on a price. I am not looking to retire on this one but cutting up a car is a lot of work if done right. Pictures can be sent to bdstone914@aol.com. You can also call me at 951 536 7478.

I can ship large parts but is may take some time to pack the big sections.

Local pickup is preferred.

Pictures to follow.

And yes Andy I will post the VIN in the data base this time.

Bruce

Attached thumbnail(s)

Posted by: TargaToy Oct 10 2011, 09:10 PM

Will you separate the areas containing the exterior door handles and vent pipes from the rear fenders?

If so, why the bondo near the sails? I need areas not rusted out from behind.

Thanks.

Attached Image

Posted by: ThePaintedMan Oct 10 2011, 09:26 PM

PM Sent for the passenger suspension console, if nothing else!

Posted by: bdstone914 Oct 11 2011, 04:53 PM

Passenger suspension console spoken for.
.
Will confirm it is useable after I cut it out.

Bruce

Posted by: jmill Oct 13 2011, 06:21 PM

I need a fairly straight and rust free drivers side front panel and drivers side headlight bucket including the drain tube. If it's rusted through in the hoodseal area I don't want it. The bucket pictured is for a 75-76. I need the early one.

Attached image(s)

Posted by: bdstone914 Oct 21 2011, 09:00 AM

Bump for pictures added

More pictures upon request of specific areas.

Posted by: budk Oct 21 2011, 09:55 AM

1. What condition are the rear taillight sections?

2. Is the engine/tranny support bar available?

Thanks.

Posted by: porbmw Oct 29 2011, 07:58 AM

Hi Bruce

This is a slight hijack....but just to let you know that I FINALLY got across the Border to pick up parts....
All is great, thanks for the door glass and window vents...and for throwing in (gently) the extra vent glass

Paul

Posted by: jmill Oct 29 2011, 08:46 AM

Headlight bucket looks decent. PM me with price.