Printable Version of Topic

Posted by: jimkelly Oct 17 2011, 12:53 PM

the pistons seem to be measuring 95.4x mm


Attached thumbnail(s)


Attached image(s)

Posted by: jimkelly Oct 17 2011, 06:30 PM

price dropped to $200 based on this sale at club.

http://www.914club.com/bbs2/index.php?showtopic=236607

jim

Posted by: jimkelly Oct 20 2011, 01:25 PM

ATTENTION - I JUST NOTICED IN ONE OF MY PICS A CRACKED TOP FIN ON ONE OF THE CYLINDERS <<


Attached image(s)

Posted by: jimkelly Oct 22 2011, 04:55 AM

Posted by: cwpeden Oct 22 2011, 06:47 PM

What are you measuring to?

Posted by: jimkelly Oct 23 2011, 02:30 PM

Posted by: jimkelly Nov 6 2011, 09:23 AM

Posted by: jimkelly Nov 23 2011, 07:07 AM

Posted by: sean_v8_914 Nov 23 2011, 09:01 AM

95.XXmm?

Posted by: jimkelly Nov 23 2011, 09:40 AM

Posted by: 7275914911 Nov 23 2011, 09:42 AM

If they ARE 95mm (or 95.xx) i would be interested...

Is the missing fin going to create heat issues?? The replies to Garage thread are incouraging.


EDIT.....
Now to find out what you really have....The numbers on the box give indication of below..
VW9400T4 021-198-200 94x71mm 2000cc Dish Top

They obviously are not dish tops and you a diffently measuring 95 in the pic...Hummm

Posted by: jimkelly Nov 23 2011, 10:39 AM

see pics above and below.

Posted by: jimkelly Nov 23 2011, 10:46 AM

pin


Attached image(s)

Posted by: sean_v8_914 Nov 23 2011, 10:51 AM

please buy a battery for your calipers, sir...so we can define .XX (95.XX)
wrist pins are 24mm

Posted by: 7275914911 Nov 23 2011, 10:59 AM

Hey Jim,

I kinda would need to know exact since they are larger than 95 it seems.
95.20mm would be the max. that would be legal...

Ken

Posted by: jimkelly Nov 23 2011, 11:13 AM

pic

i had a battery with some life left in it.

95.44


Attached thumbnail(s)

Posted by: jimkelly Nov 29 2011, 08:09 AM

price dropped to $150

Posted by: sean_v8_914 Nov 29 2011, 08:41 AM

could we see a profile photo of a piston so I can see wrist pin height? this will tell us whAT STROKE they are made for

Posted by: jimkelly Nov 29 2011, 08:54 AM

piston profile


Attached image(s)

Posted by: 1973916S Nov 29 2011, 12:17 PM

Hello

For reference Pistons are measured @ the gauge point, about .500" from the bottom of the skirt.

http://www.jepistons.com/PDFs/TechCorner/SCPDrawings/piston_instrc4032.pdf

Posted by: jimkelly Dec 9 2011, 11:04 AM

Posted by: jimkelly Dec 13 2011, 11:53 AM