These came off a good running 1.7 motor. No broken fins. $125 Pair plus shipping
Attached image(s)
Those are actually 1.7 heads. They came off a 1.7. If they had been on a 1.8 the registers would have been opened to 105mm. Measure those and you'll see that they are actually ~100mm
I will check them. The part number 021.101.371J is listed as a 1.8
Thanks HAM Inc for catching that!
No offense by this, but you can pick up a whole running 1.7 for 250...
AHH! Good Point
Thanks!
$125 for the pair
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)