Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB: Wiper Motor Assembly, Door Handles, weber manifold
Posted by: ThePaintedMan Dec 7 2011, 04:39 PM
Hey all,
I'm looking for a wiper motor and assembly for a 1973 914. Also, am looking for good, cheap outer door handles without locks. Those are the main two things I'll need to get the car back on the road. Also, I need 1 manifold like the one in the picture when I get the dual weber setup done (sorry, borrowed the picture off of this forum). I have not been able to verify what type of manifold this is, but as of right now I only have one 
I prefer stuff thats banged up or otherwise ugly, as I'll be refinishing everything anyway. Just trying to save money and avoid Ebay. 
Thank you,
-George
Posted by: ThePaintedMan Dec 7 2011, 08:18 PM
If nothing else, could anyone help me identify that intake manifold?
Posted by: hot_shoe914 Dec 7 2011, 08:55 PM
I have a wiper motor and assembly from my '73 parts car if you are interested.
Posted by: porsha916 Dec 9 2011, 08:24 AM
hi, Somehow I ended up with a single manifold, $20+ shipping from 13743, It's not the same but it maybe useable! Sorry pic's are not to good.
Hey all,
I'm looking for a wiper motor and assembly for a 1973 914. Also, am looking for good, cheap outer door handles without locks. Those are the main two things I'll need to get the car back on the road. Also, I need 1 manifold like the one in the picture when I get the dual weber setup done (sorry, borrowed the picture off of this forum). I have not been able to verify what type of manifold this is, but as of right now I only have one
I prefer stuff thats banged up or otherwise ugly, as I'll be refinishing everything anyway. Just trying to save money and avoid Ebay. Thank you,
-George
Posted by: bdstone914 Dec 9 2011, 08:41 AM
You need a matching pair of manifolds if you want to have the engine run right. Different designs will have different flow characteristics. I have a couple of pairs of Weber manifolds. I think $50 a pair is a fair going price. I also have wiper motor assemblies from California cars that have see little use for $25 plus shipping.
And I have some crappy ugly door handles for $20 each. I could pick the least ugly ones. They are good candidates for getting painted.
Bruce
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)