Need #21, both left and right. PET does not show a PN...but indicates 2 different lengths, one left, one right. Anyone have a set they can send me?
Thanks...
Attached image(s)
Jeff,
Just go the the Hobby store and get piano wire.
Van914
Hey Jeff,
I cut up a stainless steel' whip' part of a base-loaded CB radio antenna to make mine.
I'd think a couple of pieces cut from a good stiff coat hanger would probably work too ... and a lot easier to cut
Mr. B..top of the day to yah sir..
hey, on some of the engines I have pulled apart...
coat hanger rod really..I tried 15 years ago to get those thru Porsche...
no go...
A nail, cut to length works really good and they're cheap too! Don't remember if I used 8 or 16 penny.
Found a pair for you. Fair offer and they are yours.
http://img84.imageshack.us/i/typeivfanshroudflapperp.jpg/
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)