Pictures to follow.
All prices are OBRO = or best reasonable offer.
I have a 1973 GA case 2.0L engine that I will sell all or parts.
I have removed the FI, tin and heads. The engine had low compression based on the low turning resistance and burnt oil deposits on the pistons.
No sign of lower end problems.
SOLD
[s]Heads $400
Short Block -Lower end $250 Case, crank, rods cam lifters, etc.
Crank and rods only $150
Assembled, no problems known
Taco plate $75
Includes cover and sender. One from this engine sold but I have other ones.
Flywheel $75
Very low miles plenty of material left. Based on papers in the car it came from it looks like it had about 5,000 miles on it.
Sold
[s]Map sensor 043
FI - make offer
Harness is very brittle. Will sell all or part.
Will ship all parts except the short block.
Bruce,
Heads.
PM sent...
Bruce,
PM sent - MPS
i might need your crank and rods.
i'll know monday or tuesday. i'll pm you either way. thanks
paul
Bruce you would have a extra taco plate cover would you?
Interested in the Flywheel. Do you have pics?
Thanks.
I can send a picture but it is hard to show much detail. What detail are you looking for? I have an excellent flywheel for $75.
The flywheel has plenty of material left. I looks like a new flywheel with little use.
I can ship it for $15 in a flat rate box.
Bruce
PM sent!
Is the case in good shape? will you ship just the case?
PM sent
PM Sent.
Bruce,
I've just sourced a 2.0 ltr (1973) in parts... when I assemble the motor, will need a complete set of fasteners. Re-cad would be fantastic.
I can pick up at Ron's gathering.
Please advise,
Thanks!
Received my part. Thanks!
Adam
Bruce, is the passenger-side upper cylinder tin in good condition?
Quanto $ ?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)