Posted by: rpmmaxxed Feb 11 2012, 03:08 PM
What size motor did the carbs come off of?
Posted by: billh1963 Feb 11 2012, 03:29 PM
I'll take the speaker housings
Posted by: rnellums Feb 11 2012, 03:51 PM
QUOTE(rpmmaxxed @ Feb 11 2012, 04:08 PM)
What size motor did the carbs come off of?
a 2.0L, they are weber 40 IDF's with 28mm venturis
Posted by: ppetion Feb 11 2012, 04:23 PM
I may need those webbers, will let you know tomorrow night.
Posted by: sportlicherFahrer Feb 16 2012, 09:29 PM
Word on those carbs? I am in the game for a set as well. PM sent.
Posted by: lonewolfe Feb 17 2012, 01:52 AM
I'll take the Speedo/tach/Fuel gauges -
Posted by: BarberDave Feb 17 2012, 04:56 PM
P.M. sent on the console gauges! Dave
Posted by: lonewolfe Mar 16 2012, 02:27 AM
QUOTE(lonewolfe @ Feb 17 2012, 12:52 AM)
I'll take the Speedo/tach/Fuel gauges -
I forgot to post that I received the gauged and they look great! Just as described. Thank you!
P
Posted by: boxer914 Apr 18 2012, 11:23 AM
Any cracks in the driver side taillight?
Posted by: rnellums Apr 18 2012, 04:41 PM
There are two hairline cracks at the leftmost side, and some more at the joints between the reverse light and the main panel. I am away from my computer right now so I can't upload pictures tonight. The cracks are only visible in strong sunlight from up close.
QUOTE(Joseph Mills @ May 8 2005, 08:53 PM)
<!-- QuoteBegin Thorshammer+May 8 2005, 05:54 PM --></span><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Thorshammer @ May 8 2005, 05:54 PM)</td></tr><tr><td id='QUOTE'><!-- QuoteEBegin -->But also the clutch release pivot point could be off. Or the depth of the flywheel. check it all.
Erik<!-- QuoteEnd --></td></tr></table><span class='postcolor'><!-- QuoteEEnd -->
Thanks everyone for each of your suggestions. I made a list and checked each item.
The clutch cable is new and has slack in it where it connects to the clutch fork. The pivot fork seems to be properly located with space on either side of it at the bell housing. I remember installing the pivot ball all the way in with no spacers behind it.
The pressure plate tangs are even and there are no cracks in the spring pieces and the large rivets are tight.
The flywheel is brand new and has not been resurfaced.
However, I would like to check the depth of the surface to make sure I was provided the right flywheel.
I could not find any info in my Haynes manual.
Does anyone know what exactly I need to measure and what the spec should be?
Posted by: jeeperjohn56 May 16 2012, 11:43 PM
QUOTE(rnellums @ Mar 15 2012, 08:57 PM)
for lowered prices
What's the lowered price on center console gauge's? Is there a wiring harness with them? John
Posted by: rnellums May 17 2012, 07:45 AM
Sale pending on console gauges