Printable Version of Topic

Posted by: OU8AVW Feb 24 2012, 09:34 AM

I pulled my Sound Pad off to find a 3" round section of rust right in the center of the X behind the driver's seat. I figure if I buy the whole X it would cover me and give me a little more material for another patch or two. I see most folks looking for the part between the seats so I would love to have the leftover driver's X.

Let me know what you have. I like Paypal and am ready to rock.

Thanks in advance
Mike-

Posted by: rdauenhauer Feb 24 2012, 11:27 AM

Mike Ive got more steel

Posted by: shuie Feb 24 2012, 11:47 AM

Restoration Design sells a new panel for $125.

Posted by: OU8AVW Feb 28 2012, 08:02 AM

Please see the red outline. My bad spot is just above and inboard of the middle of the X. If I got a piece about this size it would do all I need. You can cut well outboard of the center to allow the use of the more desirable middle hump.
Thanks for all the support on this.

Posted by: MassTeener Feb 28 2012, 10:38 AM

QUOTE(OU8AVW @ Feb 28 2012, 09:02 AM)

Please see the red outline. My bad spot is just above and inboard of the middle of the X. If I got a piece about this size it would do all I need. You can cut well outboard of the center to allow the use of the more desirable middle hump.
Thanks for all the support on this.

Posted by: OU8AVW Feb 29 2012, 12:00 PM