Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB Heat blower motor mount bracket

Posted by: Tedman5 Feb 24 2012, 11:17 AM

Looking for a mounting bracket for heat blower motor on a 1970 model. And entire blower assembly if you have one.

Posted by: Al Meredith Feb 24 2012, 04:14 PM

Is this the single outlet blower ? or the one with two outlets at 180 deg ? I have either one in Atlanta.

Posted by: bdstone914 Feb 25 2012, 05:20 AM

QUOTE(Al Meredith @ Feb 24 2012, 04:14 PM)

Is this the single outlet blower ? or the one with two outlets at 180 deg ? I have either one in Atlanta.

An original 1970 would have the two outlets at 180 degrees.
Bruce

Posted by: Al Meredith Feb 25 2012, 01:05 PM

I have 4 of the early blowers. I just tested all of them and they are all good. There are two mounts , one plate with a big hole in it and it mounts to the fan shroud and there is a clamp that goes aroung the electric motor. One of the fans I have is very unique, it is zink plated not painted. The motor clamp is also plated. This blower came off of an engine that had all the tin plated, not painted. I have all the tin except one large cylinder cover 3&4 side. Oh! it is 1.7/1.8. If you are interested in any of these motors , get back. Al