I have a full EA core motor complete with heads, engine tin, alternator, flywheel, clutch and pressure plate - no distributor or injection... Any ideas what it's worth...??? Please accept my apologizes if I need to post this in the classifieds... I can post a pic tomorrow, if needed. I just want to get this out of my garage reasonably quickly. Figured I would post it on CL for a couple hundred, and put some money in my car account...
Just want to make sure I'm close-
Thanks!
Thom
Post your pics as a minimum. You'll be ignored otherwise.
Take real compression numbers for each cylinder and post as well. Measure your pressure plate depth if possible to help folks decide whether it needs or can survive another turn down.
Also, 3 or 4 stud heads, will give you an idea if it's a 2.0 or not. Pics help A LOT.
EA code would be a 1.7 engine.
Value depends on what is on it, what kind of shape it seems like it's in, and how badly you want it gone.
I'll guess at the $150-$500 range.
--DD
that's also a high compression motor - maybe won't run well on currently sold pump gas
basically it's a boat anchor except to somebody who is anal about originality
post in The Samba - some sandbuggy guy might want it
The 1.7 and 1.8 stuff is a hard sell. I've got lots of these parts and they're really not in demand. A 1.7 rebuilable core may be worth $150.
I've seen 1.7 motors going for 50-ish
I paid 60 for the last one I bought
its a few hours work just to get them disassembled if someone needs the case....
the case is worth using for most builds
the misc hardware is ok
but the internals are really not valuable.
Last one I had almost had to give away. I think I got $30 for it.
Is your car done yet?
worth more as parts if you have the patience to do that
shipping cost exceeds value as a complete motor
crank, heads, distributor, some FI parts if ya can g'tee good, etc - throw away the rest
- try the VW bus market via Samba
- we 914 guys already have more such stuff sitting around than we want
I want thank everyone who replied for their input -
In regard to my car, as Clay has said many times, I don't have one...
For those who would think that this is a classified ad, I won't post this item for sale in the classifieds just for you-
Pics can be found below, which indicate that the motor has 1.7 /1.8 heads -
I don't have the means for a compression test, and all appearances would indicate again, that this is a CORE engine...
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)