Printable Version of Topic

Posted by: vsg914 Apr 4 2012, 10:30 AM

I need to make some room, so a lot of my stuff needs to go. Parts too numerous to list. Just pm me, I probably have it.

I even have a couple of rebuildable rollers.

Curt

Posted by: rmital Apr 4 2012, 11:07 AM

PM sent.....

Posted by: LotusJoe Apr 4 2012, 11:45 AM

I'm looking for a front license plate bracket.

Thanks
Joe

Posted by: vsg914 Apr 4 2012, 12:59 PM

Is this the one you need Joe?

Posted by: ScottD914 Apr 4 2012, 01:27 PM

Hi Curt;

Would you have any fog lights and grills? Also looking for a decent mirror. Send me a PM with price and preferred payment method.
Thanks, ScottD

Posted by: vsg914 Apr 4 2012, 01:30 PM

I'll see what I have Scott. Do need the whole light fixture or just the lenses? I have a good pair of grills, but I think they are from an early car. They don't fit my 73 bumper.

Posted by: cmxvw Apr 4 2012, 03:27 PM

Do you have a pair of nice seats for a 73?

Posted by: vsg914 Apr 4 2012, 03:34 PM

sorry, no nice seats. If so they would have beeen in my car a long time ago.LOL

Posted by: LotusJoe Apr 4 2012, 05:08 PM

I believe that is a rear. The front has a bracket on the back that makes it stand off the bumper more.

Posted by: Tom_T Apr 4 2012, 05:28 PM

Careful Curt, or you may have someone climbing your fence again!

I'll be in Tulsey Town at the end of April, so maybe we can grab a bite again then!

Cheers!
Tom
///////

Posted by: vsg914 Apr 4 2012, 05:29 PM

Aw, you are correct. I'll keep looking.

Posted by: euro911 Apr 4 2012, 06:54 PM

Quanto dinero for the rear bracket?

Posted by: vsg914 Apr 5 2012, 02:12 PM

They won't like my 80 pound boxer who hates everyone but me.

Be good to see ya again Tom, let me know when you'll be here.

Posted by: wingnut86 Apr 5 2012, 06:16 PM

...any front and rear sways with drop links?

Drop links especially

Posted by: vsg914 Apr 6 2012, 09:29 AM

Pm sent wingnut.

Posted by: sfrenck Apr 6 2012, 10:12 AM

Curt,

Sent you a PM.

Thanks,
Scott

Posted by: vsg914 Apr 8 2012, 10:12 AM

I found few very good rain trays. $30 plus shipping

Posted by: 76-914 Apr 9 2012, 08:39 AM

How bout seat belts for a '73? TIA, kent

Posted by: vsg914 Apr 9 2012, 08:53 AM

How much of it do you need Kent?

Posted by: twash Apr 9 2012, 09:22 AM

need an interior light,any available

Posted by: vsg914 Apr 9 2012, 09:35 AM

No, but I may know where to get a replacement. I'm checking now.

Posted by: ThePaintedMan Apr 9 2012, 04:01 PM

How about all of the parts for the thermostat assembly? I think that means the thermostat itself, cable, roller, bracket, nut and roller bolt. This would be for a 1973 1.7, if it matters.

Also, I am in need of a complete seat belt bolt set (but mostly just the lower 4).

This is an odd part, but I also need just 1 washer that sandwiches the rubber bushings on the rear shocks.

Have any rusty rear valences?

Thanks!

Posted by: 76-914 Apr 10 2012, 07:41 AM

I need the mechanism w/ belt for both sides. Don't need bolts or misc hardware. L side won't retract w/o some nursing and when retracted the R side sounds like it's climaxing.

Posted by: vsg914 Apr 10 2012, 07:53 AM

I'll look for the best I can find. I'll pm you later.

Posted by: 76-914 Apr 11 2012, 08:13 AM

Thx, Take your time.

Posted by: ThePaintedMan Apr 11 2012, 09:17 AM

?

Posted by: vsg914 Apr 11 2012, 09:27 AM

Damn George. Don't know how you slipped by me. Sorry.
I have all the peices for the thermstat except a good bellows. Wait. I have a car I haven't checked that.
The washer that goes on top of the top rubber under the nut? If so I have it
I have everything esle.

How rusty of a valance dou want? LOL

Posted by: ThePaintedMan Apr 11 2012, 09:25 PM

Thermostat: Yeah, I need everything that would normally come with the thermostat assembly. I have the flaps, so basically everything down from that. Working bellows would be great.

Shock washer: No, I need the ones at the bottom. They sandwich the rubber bushing inside the bottom of the shock mount. There should be two. My dumbass lost one.

Valence: As far as a valence, I'm just looking for something cheap to use to repair and/or cut up. Eventually I'd like to make a fiberglass mold from it. Just enough to be able to slap on the car for now. Thanks for not forgetting me!

Oooh! One more thing: Do any of your cars have decent door hinges? I just need two hinge pins, if you feel like knocking them out. I would rather not pay the $15 a piece from PP.

Posted by: vsg914 Apr 12 2012, 11:57 AM

George, I have the pins. As for the washers, There is only one per shock. The bolt head acts as the washer on the inboard of the shock. The washer goes between the shock and trailng arm mount.

Posted by: ThePaintedMan Apr 13 2012, 04:53 PM

Okay Curt. I'll take a picture of the shock as soon as I can to clarify what I'm talking about. Think we're speaking a different language at the moment

Posted by: vsg914 Apr 13 2012, 05:03 PM

Yep, a picture is still worth a thousand words.

Posted by: scoobykvn Apr 14 2012, 06:27 PM

Any weather stripping? In particular the triangle window seal and the 3 sided seal that goes around the windshield to seal the targa on the front and Windows on the side. How about the aluminum track that holds the outer window scraper seal for an early model? Need one for each side.

Posted by: vsg914 Apr 14 2012, 07:02 PM

I'm striking out on all of that. Sorry

Posted by: euro911 Apr 14 2012, 07:58 PM

Mike (schantzMD) may still have a set of the wind-wing glass seals able (see item (G), and front targa seals (see item (S) A, B & C) ... http://www.914world.com/bbs2/index.php?showtopic=174438&hl=

New repro aluminum window scraper tracks ... http://www.914world.com/bbs2/index.php?showtopic=160517&st=0

Posted by: scoobykvn Apr 14 2012, 08:12 PM

Thanks, I will talk to him. I already posted on the scraper tracks thread. Waiting on a reply. Just thought I would keep looking.

Posted by: vsg914 Apr 14 2012, 08:25 PM

I have the scraper track, just not for the early cars.

Posted by: vsg914 Apr 16 2012, 08:20 AM

Does this pic show what you need?

Posted by: tim_nd Apr 16 2012, 02:20 PM

I received a box of parts this morning. Everything looks great!
Thanks

Posted by: vsg914 Apr 16 2012, 02:22 PM

Thank you, Tim.

Posted by: vsg914 Apr 18 2012, 01:07 PM

bump

Posted by: slimeygecko Apr 19 2012, 09:50 PM

any rear tail lights? either style would work for me

Mike

Posted by: ThePaintedMan Apr 22 2012, 12:42 PM

Hi Curt,
Sorry it took so long to get back to you. I took a look at the diagram you posted, but I'm still not quite sure what I need. I might post again in the garage to get some more input on this. Here is the picture of what I have below. Obviously these are Konis, if this matters.

Right side

Left Side

Posted by: vsg914 Apr 22 2012, 03:21 PM

Ok. That may be something particular to the koni's. Same as stock, just in two pieces. I wouldnt suspect it be any thing special.

Posted by: vsg914 May 3 2012, 06:47 AM

Bump for the world being back online. YEA.

Posted by: 76-914 May 3 2012, 08:43 AM

Any luck finding those seat belts, yet???

Posted by: vsg914 May 26 2012, 09:26 AM

Still have plenty of parts.

76-914 sent you some messages. I have your belts if you still need them.

Posted by: 70-914nut May 28 2012, 02:48 PM

Curt, Its Barry.
Any chance you have a early fog light glass lens. Mine is cracked. Could you let me know how much and send with the radio?

Posted by: vsg914 May 28 2012, 02:53 PM

I can do that Barry

Posted by: vsg914 Jun 6 2012, 04:43 PM

Bump

Posted by: stateofidleness Jun 9 2012, 04:42 PM

Curt,
Do you have any windshields in good condition?
Would you ship to Texas? (78266)

Thanks
Steve

Posted by: vsg914 Jun 9 2012, 04:50 PM

I think I do. If I can remove one without breaking it. I'm 3 for 5 at this time. Need one for my car too.

Posted by: ThePaintedMan Jun 9 2012, 05:12 PM

Curt, I've sent you a couple PMs but I assume you're still having issues with them. Can you send me a price on the following?

1 working turn signal/wiper switch assembly from a 73 or later car.
2 door hinge pins (if not expensive, I'll buy 4 instead)
Also all of the thermostat hardware necessary to mount one. If you have a working thermostat, thats a plus!
1 cheap, rusty valence if you have one.
3-4 upper metal door clips (that hold the top of the interior door panels to the door. These are riveted into the cardboard)
2 suspension bolts and hardware that bolt the back of the long front suspension bar to the body (see pic)


Attached thumbnail(s)

Posted by: vsg914 Jun 9 2012, 05:36 PM

George, I have had trouble with pm's . I'm sending you an email.

Posted by: sc-dude Jun 12 2012, 06:45 AM

hello. interested in the rear lic. plate bracket. Didn't see in your posts if you had sold it. Lemme know. cheers. otmofo at yahoo

Posted by: vsg914 Jun 16 2012, 06:52 AM

Bump

Posted by: mankowski Jun 25 2012, 06:00 PM

Do you have a good working 3 port fuel pump?

Thanks,

Eric

Posted by: vsg914 Jun 25 2012, 06:12 PM

Yes I do. I think I have one in a box that looks new. I'll look in the morning and pm you

Posted by: ThePaintedMan Jun 25 2012, 09:11 PM

Don't forget about me

Posted by: silver74insocal Jun 25 2012, 10:22 PM

how about a rear targa bar ? doesnt have to be perfect but it does have to be cheap thanks in advance

Posted by: speed metal army Jun 25 2012, 10:45 PM

Interior back pad light housing?

Posted by: vsg914 Jun 26 2012, 09:34 AM

I have most of your order together and a new price list with your latest additions.


The targa pad? I have none that are perfect. They all have a few cracks.


I have a new Hella. It does not have the silver ring around the outside, but is the corrected model that works off the door switch. 35 shipped to US.

Posted by: The Cabinetmaker Jul 12 2012, 12:47 PM

George, haven't forgotten you. working on your list.

Speed, Did you get my last PM?

Posted by: The Cabinetmaker Jul 18 2012, 11:51 AM

bump.

Posted by: ndtman Jul 20 2012, 12:27 PM

I just PM'd you regarding the Chrome lettering. Would you also happen to have the door latch mechanism for inside the passengers side door? This is what engages the door jamb post when you shut the door. Thanks.

Jerry

Posted by: The Cabinetmaker Jul 20 2012, 12:44 PM

I think I have one more set Jerry. If so, they are yours. I'll let you know tomorrow.

I do have the passenger door latch.

Posted by: mepstein Jul 20 2012, 12:50 PM

I bought some hard brake lines from Curt. Price was reasonable and they were sent in a home made wood box. Outstanding!

Posted by: Bertus Jul 20 2012, 01:02 PM

Do you have the bolt and retaining brace(?) for the pedal board?

Thanks, Bert

Posted by: The Cabinetmaker Jul 20 2012, 01:20 PM

Bert, are you looking for the dimpled washer and allen head cap screw for the board? I believe I do, but I'll have to make sure. There is one round washer, and one trapazoidal shaped washer I think.

Posted by: Geezer914 Jul 20 2012, 01:40 PM

looking for a pair of rear brake calipers???

Posted by: The Cabinetmaker Jul 20 2012, 02:03 PM

I have several, but condition is unknown.

Posted by: Bertus Jul 20 2012, 08:47 PM

[quote name='The Cabinetmaker' date='Jul 20 2012, 11:20 AM' post='1712334']
Bert, are you looking for the dimpled washer and allen head cap screw for the board? I believe I do, but I'll have to make sure. There is one round washer, and one trapazoidal shaped washer I think.
[/quot
Dimpled washer and allen head cap screw sounds right. Thanks.

Posted by: ndtman Aug 14 2012, 09:00 PM

Just a note to say I received the parts I bought from The Cabinetmaker. They arrived in great condition, and were better than I expected them to be. Thanks!