Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Stroker crank, rods and pistons

Posted by: Valy Apr 4 2012, 07:29 PM

Looking for a matched set of crank , rods and pistons.
Show me what you have and want to ship me for cheap

Posted by: Al Meredith Apr 5 2012, 07:19 AM

There are 3 different pistons (4 if you count bus) (5 if you count the high compression 1.8L) two rod types (3 if you count bus) and 2 cranks . What combo are you interested .

Posted by: Valy Apr 5 2012, 09:17 AM

QUOTE(Al Meredith @ Apr 5 2012, 06:19 AM)

There are 3 different pistons (4 if you count bus) (5 if you count the high compression 1.8L) two rod types (3 if you count bus) and 2 cranks . What combo are you interested .

As mentioned in the title, I want a stroked crank. Preferably 78mm. This requires pistons with lower compression height and matched rods. All this to avoid insane shims under the cylinders.

Posted by: Al Meredith Apr 7 2012, 07:14 PM

Sorry, you are correct. I need to read more better. Al

Posted by: Valy Apr 10 2012, 02:11 PM

Posted by: Jake Raby Apr 10 2012, 03:36 PM

How about an 80mm crank, matching rods and a set of KB 96mm stroker pistons.

I have some in my spring cleaning lot that I need to sell. These are not our components, they were pulled from one of our cores and are good to go. PM me for more details.