I have some extra stuff some of you might need -- Not sure what it is worth so I'll price it and you can make offers. Might work out some trades too - I want a CHT gauge & sender(under 14mm plug type) and I need a nice drivers door panel in black. I wanted to show them here before putting them on fleabay.
009 distributor I removed for an electronic SVDA unit. Worked good. Cap and wires available if you want them. $75.00
Calipers were extras I got with car - rubber looks good but no hardware they are dual bleeders. $75.00
EFI harness I have had for 15 years - real good shape except for one spot. I tried to show the worst place and it isn't bad. I am not sure what year it fits - I think 2.0 ? $75.00
Steering wheel in pretty good shape except for horn section metal edge.
Again , don't know what year , stitching looks really good - You guessed it - $75.00
Prices don't include shipping unless you con me into it - probably at worst another $15 - $20 . Thanks for looking.
Again make me an offer if you feel I have this stuff priced unreasonably - I have larger photos I can email if you need them.
Also have a brand new 23 mm master cylinder - $100.00
Attached thumbnail(s)
Just a heads up. Looks like you have a 1.8L L-Jet FI harness. Not sure if there was a difference from '74-'75. Hope that helps a little...
The black plug has either 6 or 7 pins on the harness..
6 for 74 1.8.....
7 for 1.8 75...there yah go..
Yepperz CW,s can be 1.8 nerd, z too..!
Dave,
I have a couple '73-'74 door panels.
First one has best vinyl but the back side is warped. Probably would install and flatten out OK.
Second one is flatter but has a chunk out of it along lower edge. Vinyl is in good shape.
Both of them have a 2-3" cut along the bottom edge of the upper pad section just above where the window winder is.
steve
Steering wheel sold
Please don't be offended but with all those broken wires and such that 1.8L FI harness may have a few good parts is all, it is not worth even repairing. Would you accept $15 for it with shipping to 94583?
Its parts may help another 1.8L to live.
Added 23mm master cylinder
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)