I am looking to buy a side shifter gear shift assembly. I need one in nice condition and no slop in the ball cup bushing. Send me some pictures of what you have with price shipped to 43206.
Dumb comment edited out.......
Ok, so I don't read well. It was before my first cup of coffee.
I am not sure if my wording was understandable. By ball cup bushing I mean the plastic bushing that is on the ball in the socket at the pivot point of the shifter arm. You can see it when the shifter is taken apart. It is under the plate under the springs.
I have a few. The ball cup bushings can be had new, I probably have a few of those too. Don't know if I have a decent knob or not.
Can you send me a picture or part number for the bushing? I can't find what I am looking for anywhere. I have replaced all of the other bushings in the system, but I can't find that one. It looks like it doesn't even come off of the shift lever.
Its #11
That is not it, that is for a tail shifter. But, I didnt even think to look at AA's hardparts catalog. I found what I needed on there. It is shift spring guide part #G90142413200. Thanks for the help.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)