Printable Version of Topic
914World.com _ FS/WTB: 914 Parts _ FS: chassis sections
Posted by: rdauenhauer May 30 2012, 10:21 PM
Here are a bunch of parts scabbed from toasted chassis's.
You may have to search all pages as items were added along the way.
1st is a piece that isn't reproduced (yet) and is often hacked open or rusted to bits.
Center Tunnel - Complete!
SOLD
Attached image(s)
Posted by: rdauenhauer Jun 7 2012, 11:40 AM
Cowl section SOLD
Attached image(s)
Posted by: rdauenhauer Jul 16 2012, 08:43 AM
Posted by: rdauenhauer Jul 22 2012, 08:38 AM
Posted by: rdauenhauer Aug 1 2012, 09:03 AM
Posted by: sean_v8_914 Aug 2 2012, 01:43 PM
nice job with the removal
Posted by: Drums66 Aug 2 2012, 07:36 PM
QUOTE(sean_v8_914 @ Aug 2 2012, 12:43 PM)
nice job with the removal
.......I was admiring that also(primo job)
Posted by: rdauenhauer Aug 3 2012, 01:14 AM
Thanks, it was a bunch of work. But I figured someone would need it.
I think the price is fair.
Posted by: sean_v8_914 Aug 3 2012, 08:15 AM
i think its fake.
where's the rust?
Posted by: rdauenhauer Aug 8 2012, 12:24 AM
Here is a Passenger side front corner with bucket.
SOLD
Attached image(s)
Posted by: rdauenhauer Aug 8 2012, 12:33 AM
Pass. outer suspension console
$100
Attached image(s)
Posted by: rdauenhauer Aug 8 2012, 12:39 AM
Hood (couple of these) $50. per
PREFER local PU
SOLD
Attached image(s)
Posted by: bdstone914 Aug 8 2012, 08:57 AM
QUOTE(rdauenhauer @ Aug 7 2012, 11:39 PM)
Hood (couple of these) $50. per
PREFER local PU
Your prices are more than fair when you consider the difficulty to find sections in that nice of a condition and teh labor to cut them out carefully.
I would hold on your prices. Lowering the price will not likely make the sale. It is finding a buyer who needs it at that time. If they need it price is secondary.
How many other choices are out there?
I usually sell any body panel for the asking price. Often takes months to sell.
If someone want me to lower the price I tell them to "go fish".
They can get out there with a sawzall and see what it takes to cut up a car.
another free bump.
Bruce
Posted by: FourBlades Aug 9 2012, 02:26 PM
I agree with Bruce, these are some nice parts.
I am tempted to buy that tunnel just to hang it on my wall.
John
Posted by: rdauenhauer Aug 14 2012, 11:15 AM
Bump
Posted by: sixnotfour Aug 14 2012, 11:46 AM
red front hood
Posted by: JRust Aug 14 2012, 01:41 PM
QUOTE(sixnotfour @ Aug 14 2012, 10:46 AM)
red front hood
Yellow left eyebrow
Posted by: tim_nd Aug 14 2012, 05:29 PM
Man, where were you a few months ago. The stuff you have for sell would of saved me a ton of time and sweat!!!
Posted by: rdauenhauer Aug 14 2012, 11:43 PM
QUOTE(JRust @ Aug 14 2012, 12:41 PM)
QUOTE(sixnotfour @ Aug 14 2012, 10:46 AM)
red front hood
Yellow left eyebrow
Black eye Pea
Posted by: rdauenhauer Aug 14 2012, 11:48 PM
QUOTE(tim_nd @ Aug 14 2012, 04:29 PM)
Man, where were you a few months ago. The stuff you have for sell would of saved me a ton of time and sweat!!!
Sorry but been right here ...
All of this stuff has been listed in one ad or another for quite some time.
I try to bump it every so often but stuff moves pretty fast around here.
Posted by: rdauenhauer Aug 15 2012, 10:40 PM
Updated! Some Items claimed, so Ill add a few more.
Posted by: rdauenhauer Aug 19 2012, 10:28 PM
Another Hood SOLD
Attached image(s)
Posted by: solex Aug 30 2012, 07:46 AM
i'm getting ready to do my floor, do you have:
Complete Floor
Inner Cross members
Lower outer fire wall (late model)
Posted by: rdauenhauer Aug 30 2012, 11:04 AM
QUOTE(solex @ Aug 30 2012, 06:46 AM)
i'm getting ready to do my floor, do you have:
Complete Floor
Inner Cross members
Lower outer fire wall (late model)
Those are all the items that typically rust out & therefor most likley were rotted on the cars that gave it up to provide these pieces.
Sorry no (except for perhaps the cross braces, Ill check) I recommend: Restoration Design.
Posted by: rdauenhauer Sep 5 2012, 09:53 PM
Posted by: rdauenhauer Sep 17 2012, 12:21 AM
Posted by: rdauenhauer Oct 1 2012, 09:54 AM
Posted by: rdauenhauer Oct 13 2012, 10:54 PM
OE clutch tube with correct bends & flare $20. + ship
Attached thumbnail(s)
Posted by: rdauenhauer Nov 1 2012, 07:36 PM
Posted by: rdauenhauer Nov 13 2012, 11:20 AM
Posted by: Evil914 Nov 14 2012, 04:25 AM
QUOTE(sean_v8_914 @ Aug 3 2012, 06:15 AM)
i think its fake.
where's the rust?
I agree,think they came from factory w/rust!!!
Posted by: drdave427 Nov 15 2012, 12:15 PM
QUOTE(rdauenhauer @ Oct 13 2012, 11:54 PM)
OE clutch tube with correct bends & flare
$20. + shipI'll take the clutch tube -- shipping to 37763 and I can do Paypal if acceptable.
Posted by: rdauenhauer Nov 15 2012, 12:41 PM
Inner Passenger Targa Support SOLD
Drivers Door Jamb section SOLD
Posted by: dfelz Nov 15 2012, 05:37 PM
QUOTE(rdauenhauer @ Aug 12 2012, 01:43 PM)
Here is the Pass. rear .25
Good Sail & Jamb!!
SOLDIf you get your hands on another pair of this section I am very interested in purchasing them!!
Thanks
David
Posted by: rdauenhauer Nov 21 2012, 02:35 PM
Posted by: rdauenhauer Jan 10 2013, 12:42 AM
Posted by: NORD Jan 13 2013, 10:52 PM
Have a fan with no broken fins?
Posted by: rdauenhauer Jan 19 2013, 06:31 PM
QUOTE(NORD @ Jan 13 2013, 08:52 PM)
Have a fan with no broken fins?
Nord wrong thread
But yes & I PM'd you.
UPDATED! Sold some big pieces.
Posted by: rdauenhauer Feb 20 2013, 11:30 PM
Posted by: rdauenhauer Dec 19 2013, 11:18 PM
Posted by: 3d914 Dec 28 2013, 03:37 PM
Rich,
while you're cuttin up cars, what would you charge me for the rear firewall between the engine bay & the rear trunk. Its double-walled most the length and probably easier to get out together (I can separate it later if needed). I need it in good shape for the area between the shock towers - since I want to move the whole thing back a few inches. So anything beyond the shock towers can be rough cut.
Here's some pics.
TIA
Posted by: rdauenhauer Mar 25 2014, 10:47 PM
Bump for Qarl
Posted by: Qarl Mar 26 2014, 06:44 AM
QUOTE(rdauenhauer @ Mar 26 2014, 12:47 AM)
Bump for Qarl
I see the part. Are you able to locate it?
Posted by: rdauenhauer Oct 13 2014, 08:32 AM
Posted by: rdauenhauer Oct 25 2014, 02:33 PM
Hey Gerard well its time to chop up the car I mentioned so yes I do have that piece (& a LOT more for the rest of you vultures)
PM me if your still on the hunt.
Posted by: rdauenhauer Feb 13 2015, 07:18 PM
Bump !!
Time to clean up the yard & section up another car.
Fenders are gone. but lots of good pieces aside from those already listed
Posted by: Kevins911 Feb 14 2015, 11:36 AM
Hi Rich, how is the drivers side lower hinge post sheet metal?
Posted by: Downunderman Feb 14 2015, 11:56 AM
Hi Rich, do you have an early front valence and or outer rockers? I have a 72 landing down here next week.
Cheers,
Posted by: rdauenhauer Mar 20 2015, 01:54 PM
Posted by: Kevins911 Apr 11 2015, 10:48 AM
QUOTE(Kevins911 @ Feb 14 2015, 10:36 AM)
Hi Rich, how is the drivers side lower hinge post sheet metal?
Did you get a chance to check on the condition of this part yet?
Thanks
Kevin
Posted by: rdauenhauer Oct 25 2017, 09:11 AM
Here is Repop Pass. long.
Inner longitudinal member, passenger. RD Code: PP352R their price $300. (before shipping). Porsche #914 501 434 11 NLA
I dont think they make this but regardless its not the best fitting part outta the box. I had to mod it, fit it then install the heater components. After all that I ended up using a scabbed OE Long.
SOLD
Attached thumbnail(s)
Posted by: burton73 Oct 25 2017, 09:33 AM
Front Chrome bumper?
Bob B
Posted by: tygaboy Oct 25 2017, 01:13 PM
I'm looking for an entire back wall (upper fire wall) section.
And I'm planning to be in the PNW in the near term and could pic it up.
I could also deliver parts to anyone between your location and the SF Bay Area.
Posted by: mb911 Oct 25 2017, 02:44 PM
I would be interested in bumpers as well..
Posted by: smveril Oct 25 2017, 07:46 PM
Do you still have the front trunk tow hook and the spare tire hold down piece for inside of the trunk?
Posted by: rdauenhauer Oct 25 2017, 09:02 PM
QUOTE(smveril @ Oct 25 2017, 06:46 PM)
Do you still have the front trunk tow hook and the spare tire hold down piece for inside of the trunk?
Tow hook, yes.
Ill look for the spare brkt I should have a couple of those.
QUOTE(mb911 @ Oct 25 2017, 01:44 PM)
I would be interested in bumpers as well..
So the Bumpers are ...in ok shape. Early no-tit front. Pretty straight & Early sharp
Edged Rear (same for /4 & /6) Both Originally Chrome Both ..(gasp)..painted Red
Ill post up some pics
Posted by: rdauenhauer Jan 23 2018, 01:26 AM
So those Bumpers are fairly straight and decent candidates for re-chroming if OE is a must.
I stripped off the paint to see what was underneath.
Ill take $200 for front or rear + Ship
Posted by: hermich Jan 24 2018, 09:42 AM
QUOTE(rdauenhauer @ Jan 23 2018, 02:26 AM)
I need a section of the passenger side engine bay sheet metal with the track that holds the cooling rubber. It would need to be about four inches wide at the front and run to about the shock tower or a little past. If you would have something like that I can send a photo of the missing section. The car was previously converted to a six and I am going back to a four. Thanks.
Posted by: rdauenhauer Jan 31 2018, 11:46 PM
QUOTE(hermich @ Jan 24 2018, 07:42 AM)
I need a section of the passenger side engine bay sheet metal with the track that holds the cooling rubber. It would need to be about four inches wide at the front and run to about the shock tower or a little past. If you would have something like that I can send a photo of the missing section. The car was previously converted to a six and I am going back to a four. Thanks.
Ill check for you
Posted by: Miss914 Feb 1 2018, 06:18 PM
QUOTE(rdauenhauer @ Oct 25 2017, 09:11 AM)
Here is Repop Pass. long.
Inner longitudinal member, passenger. RD Code: PP352R their price $300. (before shipping). Porsche #914 501 434 11 NLA
I dint think they make this but regardless its not the best fitting part outta the box. I had to mod it, fit it then install the heater components. After all that I ended up using a scabbed OE Long.
Ill Take $375 +ship
Is this piece still available?
Do you have any fenders and front crosspanel, the one behind the rubber bumpers?
Front and rear valances to a -73?
Posted by: rdauenhauer Feb 1 2018, 07:14 PM
It is.
Ive got all kinds of stuff ~
PM sent
Posted by: Jett Feb 2 2018, 12:33 AM
Hello, do you happen to have a windshield? Our paint shop cracked ours on install and we can’t bring ourselves to installing a new aftermarket one.
Cheers
Darren
QUOTE(rdauenhauer @ May 30 2012, 08:21 PM)
Here are a bunch of parts scabbed from toasted chassis's.
You may have to search all pages as items were added along the way.
1st is a piece that isn't reproduced (yet) and is often hacked open or rusted to bits.
Center Tunnel - Complete!
$250
Posted by: sixnotfour Feb 2 2018, 02:28 PM
QUOTE(Jett @ Feb 1 2018, 11:33 PM)
Hello, do you happen to have a windshield? Our paint shop cracked ours on install and we can’t bring ourselves to installing a new aftermarket one.
Cheers
Darren
QUOTE(rdauenhauer @ May 30 2012, 08:21 PM)
Here are a bunch of parts scabbed from toasted chassis's.
You may have to search all pages as items were added along the way.
1st is a piece that isn't reproduced (yet) and is often hacked open or rusted to bits.
Center Tunnel - Complete!
$250 Sad to hear that, I wondered why my phone was blowing up for a OG windshield..
Posted by: rdauenhauer Feb 2 2018, 08:03 PM
Darren Mark called me looking for one a few days ago. Must have been for you.
I did have a couple stashed away. One went into a car destined for the Lamay Museum (last min Emergency call) .
The other when I checked, turned out to be a nice one, just not a Sigla brand you all are seeking.
I do stock at least one brand new aftermarket Windshield as well.
Last OE one I bought went into my LE and took a week or so to get.
Good Luck
Posted by: rdauenhauer Feb 2 2018, 08:05 PM
QUOTE(sixnotfour @ Feb 2 2018, 12:28 PM)
Sad to hear that, I wondered why my phone was blowing up for a OG windshield.
Original
Gangsta Windshield ?
Posted by: 914werke Oct 24 2018, 07:42 PM
Time to this I have a Palma Green 75 that need to go ...
Posted by: 914werke Dec 5 2018, 10:55 AM
Posted by: 914werke Dec 21 2018, 01:04 PM
Another car going under the knife.
Attached thumbnail(s)
Posted by: Tdskip Dec 21 2018, 04:15 PM
Anyone else have the immediate instinct to try to save this thing?
I’m sure it’s a parts car for all the right reasons, not criticizing you for doing it, more of an observation on how even as a newbie I’m gotten attached to these things.
Posted by: 914werke Dec 21 2018, 05:44 PM
what is sort of deceiving from that pic is how hard it was hit at/behind the door.
The entire firewall (upper & dbl wall) is buckled incl the floor & tunnel.
I have others in better shape to save
Posted by: rick 918-S Dec 24 2018, 07:26 AM
QUOTE(rdauenhauer @ Aug 12 2012, 03:50 PM)
Here are some more pedestrian pieces:
Old post but did you sell - 4 triangle front suspension mount - 7 rear lid bolt and mount - 17 front suspension cross member mount - 24 rear lid mount & bolt pictured?
Posted by: 914werke Dec 24 2018, 10:02 AM
Rick Ive got a LOT of this stuff!
Today is kinda busy but I thought Id chk in here while I drank my coffee
Let me get back to you come Weds.
Rich
Posted by: Tbrown4x4 Dec 25 2018, 03:41 AM
Merry Christmas Rich! Can you PM me a quote for 4 nice steelies and a University Porsche Audi plate frame?
Posted by: rick 918-S Dec 25 2018, 09:08 AM
QUOTE(914werke @ Dec 24 2018, 10:02 AM)
Rick Ive got a LOT of this stuff!
Today is kinda busy but I thought Id chk in here while I drank my coffee
Let me get back to you come Weds.
Rich
No hurry bud. Merry Christmas!
Posted by: 914werke Oct 3 2019, 08:51 PM
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)